Файл: sys/classes/pclzip.class.php
Строк: 3631
<?php
if (!defined('PCLZIP_READ_BLOCK_SIZE')) {
define('PCLZIP_READ_BLOCK_SIZE', 2048);
}
if (!defined('PCLZIP_SEPARATOR')) {
define('PCLZIP_SEPARATOR', ',');
}
if (!defined('PCLZIP_ERROR_EXTERNAL')) {
define('PCLZIP_ERROR_EXTERNAL', 0);
}
if (!defined('PCLZIP_TEMPORARY_DIR')) {
define('PCLZIP_TEMPORARY_DIR', '');
}
if (!defined('PCLZIP_TEMPORARY_FILE_RATIO')) {
define('PCLZIP_TEMPORARY_FILE_RATIO', 0.47);
}
$g_pclzip_version = "2.8.2";
define('PCLZIP_ERR_USER_ABORTED', 2);
define('PCLZIP_ERR_NO_ERROR', 0);
define('PCLZIP_ERR_WRITE_OPEN_FAIL', -1);
define('PCLZIP_ERR_READ_OPEN_FAIL', -2);
define('PCLZIP_ERR_INVALID_PARAMETER', -3);
define('PCLZIP_ERR_MISSING_FILE', -4);
define('PCLZIP_ERR_FILENAME_TOO_LONG', -5);
define('PCLZIP_ERR_INVALID_ZIP', -6);
define('PCLZIP_ERR_BAD_EXTRACTED_FILE', -7);
define('PCLZIP_ERR_DIR_CREATE_FAIL', -8);
define('PCLZIP_ERR_BAD_EXTENSION', -9);
define('PCLZIP_ERR_BAD_FORMAT', -10);
define('PCLZIP_ERR_DELETE_FILE_FAIL', -11);
define('PCLZIP_ERR_RENAME_FILE_FAIL', -12);
define('PCLZIP_ERR_BAD_CHECKSUM', -13);
define('PCLZIP_ERR_INVALID_ARCHIVE_ZIP', -14);
define('PCLZIP_ERR_MISSING_OPTION_VALUE', -15);
define('PCLZIP_ERR_INVALID_OPTION_VALUE', -16);
define('PCLZIP_ERR_ALREADY_A_DIRECTORY', -17);
define('PCLZIP_ERR_UNSUPPORTED_COMPRESSION', -18);
define('PCLZIP_ERR_UNSUPPORTED_ENCRYPTION', -19);
define('PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE', -20);
define('PCLZIP_ERR_DIRECTORY_RESTRICTION', -21);
define('PCLZIP_OPT_PATH', 77001);
define('PCLZIP_OPT_ADD_PATH', 77002);
define('PCLZIP_OPT_REMOVE_PATH', 77003);
define('PCLZIP_OPT_REMOVE_ALL_PATH', 77004);
define('PCLZIP_OPT_SET_CHMOD', 77005);
define('PCLZIP_OPT_EXTRACT_AS_STRING', 77006);
define('PCLZIP_OPT_NO_COMPRESSION', 77007);
define('PCLZIP_OPT_BY_NAME', 77008);
define('PCLZIP_OPT_BY_INDEX', 77009);
define('PCLZIP_OPT_BY_EREG', 77010);
define('PCLZIP_OPT_BY_PREG', 77011);
define('PCLZIP_OPT_COMMENT', 77012);
define('PCLZIP_OPT_ADD_COMMENT', 77013);
define('PCLZIP_OPT_PREPEND_COMMENT', 77014);
define('PCLZIP_OPT_EXTRACT_IN_OUTPUT', 77015);
define('PCLZIP_OPT_REPLACE_NEWER', 77016);
define('PCLZIP_OPT_STOP_ON_ERROR', 77017);
define('PCLZIP_OPT_EXTRACT_DIR_RESTRICTION', 77019);
define('PCLZIP_OPT_TEMP_FILE_THRESHOLD', 77020);
define('PCLZIP_OPT_ADD_TEMP_FILE_THRESHOLD', 77020); // alias
define('PCLZIP_OPT_TEMP_FILE_ON', 77021);
define('PCLZIP_OPT_ADD_TEMP_FILE_ON', 77021); // alias
define('PCLZIP_OPT_TEMP_FILE_OFF', 77022);
define('PCLZIP_OPT_ADD_TEMP_FILE_OFF', 77022); // alias
define('PCLZIP_ATT_FILE_NAME', 79001);
define('PCLZIP_ATT_FILE_NEW_SHORT_NAME', 79002);
define('PCLZIP_ATT_FILE_NEW_FULL_NAME', 79003);
define('PCLZIP_ATT_FILE_MTIME', 79004);
define('PCLZIP_ATT_FILE_CONTENT', 79005);
define('PCLZIP_ATT_FILE_COMMENT', 79006);
define('PCLZIP_CB_PRE_EXTRACT', 78001);
define('PCLZIP_CB_POST_EXTRACT', 78002);
define('PCLZIP_CB_PRE_ADD', 78003);
define('PCLZIP_CB_POST_ADD', 78004);
class PclZip {
public $zipname = '';
public $zip_fd = 0;
public $error_code = 1;
public $error_string = '';
public $magic_quotes_status;
function PclZip($p_zipname) {
if (!function_exists('gzopen')) {
die('Abort ' . basename(__FILE__) . ' : Missing zlib extensions');
}
$this->zipname = $p_zipname;
$this->zip_fd = 0;
$this->magic_quotes_status = -1;
return;
}
function create($p_filelist) {
$v_result = 1;
// ----- Reset the error handler
$this->privErrorReset();
// ----- Set default values
$v_options = array();
$v_options[PCLZIP_OPT_NO_COMPRESSION] = FALSE;
// ----- Look for variable options arguments
$v_size = func_num_args();
// ----- Look for arguments
if ($v_size > 1) {
// ----- Get the arguments
$v_arg_list = func_get_args();
// ----- Remove from the options list the first argument
array_shift($v_arg_list);
$v_size--;
// ----- Look for first arg
if ((is_integer($v_arg_list[0])) && ($v_arg_list[0] > 77000)) {
// ----- Parse the options
$v_result = $this->privParseOptions($v_arg_list, $v_size, $v_options, array(PCLZIP_OPT_REMOVE_PATH => 'optional',
PCLZIP_OPT_REMOVE_ALL_PATH => 'optional',
PCLZIP_OPT_ADD_PATH => 'optional',
PCLZIP_CB_PRE_ADD => 'optional',
PCLZIP_CB_POST_ADD => 'optional',
PCLZIP_OPT_NO_COMPRESSION => 'optional',
PCLZIP_OPT_COMMENT => 'optional',
PCLZIP_OPT_TEMP_FILE_THRESHOLD => 'optional',
PCLZIP_OPT_TEMP_FILE_ON => 'optional',
PCLZIP_OPT_TEMP_FILE_OFF => 'optional'
//, PCLZIP_OPT_CRYPT => 'optional'
));
if ($v_result != 1) {
return 0;
}
}
// ----- Look for 2 args
// Here we need to support the first historic synopsis of the
// method.
else {
// ----- Get the first argument
$v_options[PCLZIP_OPT_ADD_PATH] = $v_arg_list[0];
// ----- Look for the optional second argument
if ($v_size == 2) {
$v_options[PCLZIP_OPT_REMOVE_PATH] = $v_arg_list[1];
} else if ($v_size > 2) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid number / type of arguments");
return 0;
}
}
}
// ----- Look for default option values
$this->privOptionDefaultThreshold($v_options);
// ----- Init
$v_string_list = array();
$v_att_list = array();
$v_filedescr_list = array();
$p_result_list = array();
// ----- Look if the $p_filelist is really an array
if (is_array($p_filelist)) {
// ----- Look if the first element is also an array
// This will mean that this is a file description entry
if (isset($p_filelist[0]) && is_array($p_filelist[0])) {
$v_att_list = $p_filelist;
}
// ----- The list is a list of string names
else {
$v_string_list = $p_filelist;
}
}
// ----- Look if the $p_filelist is a string
else if (is_string($p_filelist)) {
// ----- Create a list from the string
$v_string_list = explode(PCLZIP_SEPARATOR, $p_filelist);
}
// ----- Invalid variable type for $p_filelist
else {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid variable type p_filelist");
return 0;
}
// ----- Reformat the string list
if (sizeof($v_string_list) != 0) {
foreach ($v_string_list as $v_string) {
if ($v_string != '') {
$v_att_list[][PCLZIP_ATT_FILE_NAME] = $v_string;
} else {
}
}
}
// ----- For each file in the list check the attributes
$v_supported_attributes = array(PCLZIP_ATT_FILE_NAME => 'mandatory'
, PCLZIP_ATT_FILE_NEW_SHORT_NAME => 'optional'
, PCLZIP_ATT_FILE_NEW_FULL_NAME => 'optional'
, PCLZIP_ATT_FILE_MTIME => 'optional'
, PCLZIP_ATT_FILE_CONTENT => 'optional'
, PCLZIP_ATT_FILE_COMMENT => 'optional'
);
foreach ($v_att_list as $v_entry) {
$v_result = $this->privFileDescrParseAtt($v_entry, $v_filedescr_list[], $v_options, $v_supported_attributes);
if ($v_result != 1) {
return 0;
}
}
// ----- Expand the filelist (expand directories)
$v_result = $this->privFileDescrExpand($v_filedescr_list, $v_options);
if ($v_result != 1) {
return 0;
}
// ----- Call the create fct
$v_result = $this->privCreate($v_filedescr_list, $p_result_list, $v_options);
if ($v_result != 1) {
return 0;
}
// ----- Return
return $p_result_list;
}
function add($p_filelist) {
$v_result = 1;
// ----- Reset the error handler
$this->privErrorReset();
// ----- Set default values
$v_options = array();
$v_options[PCLZIP_OPT_NO_COMPRESSION] = FALSE;
// ----- Look for variable options arguments
$v_size = func_num_args();
// ----- Look for arguments
if ($v_size > 1) {
// ----- Get the arguments
$v_arg_list = func_get_args();
// ----- Remove form the options list the first argument
array_shift($v_arg_list);
$v_size--;
// ----- Look for first arg
if ((is_integer($v_arg_list[0])) && ($v_arg_list[0] > 77000)) {
// ----- Parse the options
$v_result = $this->privParseOptions($v_arg_list, $v_size, $v_options, array(PCLZIP_OPT_REMOVE_PATH => 'optional',
PCLZIP_OPT_REMOVE_ALL_PATH => 'optional',
PCLZIP_OPT_ADD_PATH => 'optional',
PCLZIP_CB_PRE_ADD => 'optional',
PCLZIP_CB_POST_ADD => 'optional',
PCLZIP_OPT_NO_COMPRESSION => 'optional',
PCLZIP_OPT_COMMENT => 'optional',
PCLZIP_OPT_ADD_COMMENT => 'optional',
PCLZIP_OPT_PREPEND_COMMENT => 'optional',
PCLZIP_OPT_TEMP_FILE_THRESHOLD => 'optional',
PCLZIP_OPT_TEMP_FILE_ON => 'optional',
PCLZIP_OPT_TEMP_FILE_OFF => 'optional'
//, PCLZIP_OPT_CRYPT => 'optional'
));
if ($v_result != 1) {
return 0;
}
}
// ----- Look for 2 args
// Here we need to support the first historic synopsis of the
// method.
else {
// ----- Get the first argument
$v_options[PCLZIP_OPT_ADD_PATH] = $v_add_path = $v_arg_list[0];
// ----- Look for the optional second argument
if ($v_size == 2) {
$v_options[PCLZIP_OPT_REMOVE_PATH] = $v_arg_list[1];
} else if ($v_size > 2) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid number / type of arguments");
// ----- Return
return 0;
}
}
}
// ----- Look for default option values
$this->privOptionDefaultThreshold($v_options);
// ----- Init
$v_string_list = array();
$v_att_list = array();
$v_filedescr_list = array();
$p_result_list = array();
// ----- Look if the $p_filelist is really an array
if (is_array($p_filelist)) {
// ----- Look if the first element is also an array
// This will mean that this is a file description entry
if (isset($p_filelist[0]) && is_array($p_filelist[0])) {
$v_att_list = $p_filelist;
}
// ----- The list is a list of string names
else {
$v_string_list = $p_filelist;
}
}
// ----- Look if the $p_filelist is a string
else if (is_string($p_filelist)) {
// ----- Create a list from the string
$v_string_list = explode(PCLZIP_SEPARATOR, $p_filelist);
}
// ----- Invalid variable type for $p_filelist
else {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid variable type '" . gettype($p_filelist) . "' for p_filelist");
return 0;
}
// ----- Reformat the string list
if (sizeof($v_string_list) != 0) {
foreach ($v_string_list as $v_string) {
$v_att_list[][PCLZIP_ATT_FILE_NAME] = $v_string;
}
}
// ----- For each file in the list check the attributes
$v_supported_attributes = array(PCLZIP_ATT_FILE_NAME => 'mandatory'
, PCLZIP_ATT_FILE_NEW_SHORT_NAME => 'optional'
, PCLZIP_ATT_FILE_NEW_FULL_NAME => 'optional'
, PCLZIP_ATT_FILE_MTIME => 'optional'
, PCLZIP_ATT_FILE_CONTENT => 'optional'
, PCLZIP_ATT_FILE_COMMENT => 'optional'
);
foreach ($v_att_list as $v_entry) {
$v_result = $this->privFileDescrParseAtt($v_entry, $v_filedescr_list[], $v_options, $v_supported_attributes);
if ($v_result != 1) {
return 0;
}
}
// ----- Expand the filelist (expand directories)
$v_result = $this->privFileDescrExpand($v_filedescr_list, $v_options);
if ($v_result != 1) {
return 0;
}
// ----- Call the create fct
$v_result = $this->privAdd($v_filedescr_list, $p_result_list, $v_options);
if ($v_result != 1) {
return 0;
}
// ----- Return
return $p_result_list;
}
function listContent() {
$v_result = 1;
// ----- Reset the error handler
$this->privErrorReset();
// ----- Check archive
if (!$this->privCheckFormat()) {
return(0);
}
// ----- Call the extracting fct
$p_list = array();
if (($v_result = $this->privList($p_list)) != 1) {
unset($p_list);
return(0);
}
// ----- Return
return $p_list;
}
function extract() {
$v_result = 1;
// ----- Reset the error handler
$this->privErrorReset();
// ----- Check archive
if (!$this->privCheckFormat()) {
return(0);
}
// ----- Set default values
$v_options = array();
// $v_path = "./";
$v_path = '';
$v_remove_path = "";
$v_remove_all_path = false;
// ----- Look for variable options arguments
$v_size = func_num_args();
// ----- Default values for option
$v_options[PCLZIP_OPT_EXTRACT_AS_STRING] = FALSE;
// ----- Look for arguments
if ($v_size > 0) {
// ----- Get the arguments
$v_arg_list = func_get_args();
// ----- Look for first arg
if ((is_integer($v_arg_list[0])) && ($v_arg_list[0] > 77000)) {
// ----- Parse the options
$v_result = $this->privParseOptions($v_arg_list, $v_size, $v_options, array(PCLZIP_OPT_PATH => 'optional',
PCLZIP_OPT_REMOVE_PATH => 'optional',
PCLZIP_OPT_REMOVE_ALL_PATH => 'optional',
PCLZIP_OPT_ADD_PATH => 'optional',
PCLZIP_CB_PRE_EXTRACT => 'optional',
PCLZIP_CB_POST_EXTRACT => 'optional',
PCLZIP_OPT_SET_CHMOD => 'optional',
PCLZIP_OPT_BY_NAME => 'optional',
PCLZIP_OPT_BY_EREG => 'optional',
PCLZIP_OPT_BY_PREG => 'optional',
PCLZIP_OPT_BY_INDEX => 'optional',
PCLZIP_OPT_EXTRACT_AS_STRING => 'optional',
PCLZIP_OPT_EXTRACT_IN_OUTPUT => 'optional',
PCLZIP_OPT_REPLACE_NEWER => 'optional'
, PCLZIP_OPT_STOP_ON_ERROR => 'optional'
, PCLZIP_OPT_EXTRACT_DIR_RESTRICTION => 'optional',
PCLZIP_OPT_TEMP_FILE_THRESHOLD => 'optional',
PCLZIP_OPT_TEMP_FILE_ON => 'optional',
PCLZIP_OPT_TEMP_FILE_OFF => 'optional'
));
if ($v_result != 1) {
return 0;
}
// ----- Set the arguments
if (isset($v_options[PCLZIP_OPT_PATH])) {
$v_path = $v_options[PCLZIP_OPT_PATH];
}
if (isset($v_options[PCLZIP_OPT_REMOVE_PATH])) {
$v_remove_path = $v_options[PCLZIP_OPT_REMOVE_PATH];
}
if (isset($v_options[PCLZIP_OPT_REMOVE_ALL_PATH])) {
$v_remove_all_path = $v_options[PCLZIP_OPT_REMOVE_ALL_PATH];
}
if (isset($v_options[PCLZIP_OPT_ADD_PATH])) {
// ----- Check for '/' in last path char
if ((strlen($v_path) > 0) && (substr($v_path, -1) != '/')) {
$v_path .= '/';
}
$v_path .= $v_options[PCLZIP_OPT_ADD_PATH];
}
}
// ----- Look for 2 args
// Here we need to support the first historic synopsis of the
// method.
else {
// ----- Get the first argument
$v_path = $v_arg_list[0];
// ----- Look for the optional second argument
if ($v_size == 2) {
$v_remove_path = $v_arg_list[1];
} else if ($v_size > 2) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid number / type of arguments");
// ----- Return
return 0;
}
}
}
// ----- Look for default option values
$this->privOptionDefaultThreshold($v_options);
// ----- Trace
// ----- Call the extracting fct
$p_list = array();
$v_result = $this->privExtractByRule($p_list, $v_path, $v_remove_path, $v_remove_all_path, $v_options);
if ($v_result < 1) {
unset($p_list);
return(0);
}
// ----- Return
return $p_list;
}
function extractByIndex($p_index) {
$v_result = 1;
// ----- Reset the error handler
$this->privErrorReset();
// ----- Check archive
if (!$this->privCheckFormat()) {
return(0);
}
// ----- Set default values
$v_options = array();
// $v_path = "./";
$v_path = '';
$v_remove_path = "";
$v_remove_all_path = false;
// ----- Look for variable options arguments
$v_size = func_num_args();
// ----- Default values for option
$v_options[PCLZIP_OPT_EXTRACT_AS_STRING] = FALSE;
// ----- Look for arguments
if ($v_size > 1) {
// ----- Get the arguments
$v_arg_list = func_get_args();
// ----- Remove form the options list the first argument
array_shift($v_arg_list);
$v_size--;
// ----- Look for first arg
if ((is_integer($v_arg_list[0])) && ($v_arg_list[0] > 77000)) {
// ----- Parse the options
$v_result = $this->privParseOptions($v_arg_list, $v_size, $v_options, array(PCLZIP_OPT_PATH => 'optional',
PCLZIP_OPT_REMOVE_PATH => 'optional',
PCLZIP_OPT_REMOVE_ALL_PATH => 'optional',
PCLZIP_OPT_EXTRACT_AS_STRING => 'optional',
PCLZIP_OPT_ADD_PATH => 'optional',
PCLZIP_CB_PRE_EXTRACT => 'optional',
PCLZIP_CB_POST_EXTRACT => 'optional',
PCLZIP_OPT_SET_CHMOD => 'optional',
PCLZIP_OPT_REPLACE_NEWER => 'optional'
, PCLZIP_OPT_STOP_ON_ERROR => 'optional'
, PCLZIP_OPT_EXTRACT_DIR_RESTRICTION => 'optional',
PCLZIP_OPT_TEMP_FILE_THRESHOLD => 'optional',
PCLZIP_OPT_TEMP_FILE_ON => 'optional',
PCLZIP_OPT_TEMP_FILE_OFF => 'optional'
));
if ($v_result != 1) {
return 0;
}
// ----- Set the arguments
if (isset($v_options[PCLZIP_OPT_PATH])) {
$v_path = $v_options[PCLZIP_OPT_PATH];
}
if (isset($v_options[PCLZIP_OPT_REMOVE_PATH])) {
$v_remove_path = $v_options[PCLZIP_OPT_REMOVE_PATH];
}
if (isset($v_options[PCLZIP_OPT_REMOVE_ALL_PATH])) {
$v_remove_all_path = $v_options[PCLZIP_OPT_REMOVE_ALL_PATH];
}
if (isset($v_options[PCLZIP_OPT_ADD_PATH])) {
// ----- Check for '/' in last path char
if ((strlen($v_path) > 0) && (substr($v_path, -1) != '/')) {
$v_path .= '/';
}
$v_path .= $v_options[PCLZIP_OPT_ADD_PATH];
}
if (!isset($v_options[PCLZIP_OPT_EXTRACT_AS_STRING])) {
$v_options[PCLZIP_OPT_EXTRACT_AS_STRING] = FALSE;
} else {
}
}
// ----- Look for 2 args
// Here we need to support the first historic synopsis of the
// method.
else {
// ----- Get the first argument
$v_path = $v_arg_list[0];
// ----- Look for the optional second argument
if ($v_size == 2) {
$v_remove_path = $v_arg_list[1];
} else if ($v_size > 2) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid number / type of arguments");
// ----- Return
return 0;
}
}
}
// ----- Trace
// ----- Trick
// Here I want to reuse extractByRule(), so I need to parse the $p_index
// with privParseOptions()
$v_arg_trick = array(PCLZIP_OPT_BY_INDEX, $p_index);
$v_options_trick = array();
$v_result = $this->privParseOptions($v_arg_trick, sizeof($v_arg_trick), $v_options_trick, array(PCLZIP_OPT_BY_INDEX => 'optional'));
if ($v_result != 1) {
return 0;
}
$v_options[PCLZIP_OPT_BY_INDEX] = $v_options_trick[PCLZIP_OPT_BY_INDEX];
// ----- Look for default option values
$this->privOptionDefaultThreshold($v_options);
// ----- Call the extracting fct
if (($v_result = $this->privExtractByRule($p_list, $v_path, $v_remove_path, $v_remove_all_path, $v_options)) < 1) {
return(0);
}
// ----- Return
return $p_list;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function :
// delete([$p_option, $p_option_value, ...])
// Description :
// This method removes files from the archive.
// If no parameters are given, then all the archive is emptied.
// Parameters :
// None or optional arguments.
// Options :
// PCLZIP_OPT_BY_INDEX :
// PCLZIP_OPT_BY_NAME :
// PCLZIP_OPT_BY_EREG :
// PCLZIP_OPT_BY_PREG :
// Return Values :
// 0 on failure,
// The list of the files which are still present in the archive.
// (see PclZip::listContent() for list entry format)
// --------------------------------------------------------------------------------
function delete() {
$v_result = 1;
// ----- Reset the error handler
$this->privErrorReset();
// ----- Check archive
if (!$this->privCheckFormat()) {
return(0);
}
// ----- Set default values
$v_options = array();
// ----- Look for variable options arguments
$v_size = func_num_args();
// ----- Look for arguments
if ($v_size > 0) {
// ----- Get the arguments
$v_arg_list = func_get_args();
// ----- Parse the options
$v_result = $this->privParseOptions($v_arg_list, $v_size, $v_options, array(PCLZIP_OPT_BY_NAME => 'optional',
PCLZIP_OPT_BY_EREG => 'optional',
PCLZIP_OPT_BY_PREG => 'optional',
PCLZIP_OPT_BY_INDEX => 'optional'));
if ($v_result != 1) {
return 0;
}
}
// ----- Magic quotes trick
$this->privDisableMagicQuotes();
// ----- Call the delete fct
$v_list = array();
if (($v_result = $this->privDeleteByRule($v_list, $v_options)) != 1) {
$this->privSwapBackMagicQuotes();
unset($v_list);
return(0);
}
// ----- Magic quotes trick
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_list;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : deleteByIndex()
// Description :
// ***** Deprecated *****
// delete(PCLZIP_OPT_BY_INDEX, $p_index) should be prefered.
// --------------------------------------------------------------------------------
function deleteByIndex($p_index) {
$p_list = $this->delete(PCLZIP_OPT_BY_INDEX, $p_index);
// ----- Return
return $p_list;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : properties()
// Description :
// This method gives the properties of the archive.
// The properties are :
// nb : Number of files in the archive
// comment : Comment associated with the archive file
// status : not_exist, ok
// Parameters :
// None
// Return Values :
// 0 on failure,
// An array with the archive properties.
// --------------------------------------------------------------------------------
function properties() {
// ----- Reset the error handler
$this->privErrorReset();
// ----- Magic quotes trick
$this->privDisableMagicQuotes();
// ----- Check archive
if (!$this->privCheckFormat()) {
$this->privSwapBackMagicQuotes();
return(0);
}
// ----- Default properties
$v_prop = array();
$v_prop['comment'] = '';
$v_prop['nb'] = 0;
$v_prop['status'] = 'not_exist';
// ----- Look if file exists
if (@is_file($this->zipname)) {
// ----- Open the zip file
if (($this->zip_fd = @fopen($this->zipname, 'rb')) == 0) {
$this->privSwapBackMagicQuotes();
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open archive '' . $this->zipname . '' in binary read mode');
// ----- Return
return 0;
}
// ----- Read the central directory informations
$v_central_dir = array();
if (($v_result = $this->privReadEndCentralDir($v_central_dir)) != 1) {
$this->privSwapBackMagicQuotes();
return 0;
}
// ----- Close the zip file
$this->privCloseFd();
// ----- Set the user attributes
$v_prop['comment'] = $v_central_dir['comment'];
$v_prop['nb'] = $v_central_dir['entries'];
$v_prop['status'] = 'ok';
}
// ----- Magic quotes trick
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_prop;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : duplicate()
// Description :
// This method creates an archive by copying the content of an other one. If
// the archive already exist, it is replaced by the new one without any warning.
// Parameters :
// $p_archive : The filename of a valid archive, or
// a valid PclZip object.
// Return Values :
// 1 on success.
// 0 or a negative value on error (error code).
// --------------------------------------------------------------------------------
function duplicate($p_archive) {
$v_result = 1;
// ----- Reset the error handler
$this->privErrorReset();
// ----- Look if the $p_archive is a PclZip object
if ((is_object($p_archive)) && (get_class($p_archive) == 'pclzip')) {
// ----- Duplicate the archive
$v_result = $this->privDuplicate($p_archive->zipname);
}
// ----- Look if the $p_archive is a string (so a filename)
else if (is_string($p_archive)) {
// ----- Check that $p_archive is a valid zip file
// TBC : Should also check the archive format
if (!is_file($p_archive)) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_FILE, "No file with filename '" . $p_archive . "'");
$v_result = PCLZIP_ERR_MISSING_FILE;
} else {
// ----- Duplicate the archive
$v_result = $this->privDuplicate($p_archive);
}
}
// ----- Invalid variable
else {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid variable type p_archive_to_add");
$v_result = PCLZIP_ERR_INVALID_PARAMETER;
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : merge()
// Description :
// This method merge the $p_archive_to_add archive at the end of the current
// one ($this).
// If the archive ($this) does not exist, the merge becomes a duplicate.
// If the $p_archive_to_add archive does not exist, the merge is a success.
// Parameters :
// $p_archive_to_add : It can be directly the filename of a valid zip archive,
// or a PclZip object archive.
// Return Values :
// 1 on success,
// 0 or negative values on error (see below).
// --------------------------------------------------------------------------------
function merge($p_archive_to_add) {
$v_result = 1;
// ----- Reset the error handler
$this->privErrorReset();
// ----- Check archive
if (!$this->privCheckFormat()) {
return(0);
}
// ----- Look if the $p_archive_to_add is a PclZip object
if ((is_object($p_archive_to_add)) && (get_class($p_archive_to_add) == 'pclzip')) {
// ----- Merge the archive
$v_result = $this->privMerge($p_archive_to_add);
}
// ----- Look if the $p_archive_to_add is a string (so a filename)
else if (is_string($p_archive_to_add)) {
// ----- Create a temporary archive
$v_object_archive = new PclZip($p_archive_to_add);
// ----- Merge the archive
$v_result = $this->privMerge($v_object_archive);
}
// ----- Invalid variable
else {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid variable type p_archive_to_add");
$v_result = PCLZIP_ERR_INVALID_PARAMETER;
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : errorCode()
// Description :
// Parameters :
// --------------------------------------------------------------------------------
function errorCode() {
if (PCLZIP_ERROR_EXTERNAL == 1) {
return(PclErrorCode());
} else {
return($this->error_code);
}
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : errorName()
// Description :
// Parameters :
// --------------------------------------------------------------------------------
function errorName($p_with_code = false) {
$v_name = array(PCLZIP_ERR_NO_ERROR => 'PCLZIP_ERR_NO_ERROR',
PCLZIP_ERR_WRITE_OPEN_FAIL => 'PCLZIP_ERR_WRITE_OPEN_FAIL',
PCLZIP_ERR_READ_OPEN_FAIL => 'PCLZIP_ERR_READ_OPEN_FAIL',
PCLZIP_ERR_INVALID_PARAMETER => 'PCLZIP_ERR_INVALID_PARAMETER',
PCLZIP_ERR_MISSING_FILE => 'PCLZIP_ERR_MISSING_FILE',
PCLZIP_ERR_FILENAME_TOO_LONG => 'PCLZIP_ERR_FILENAME_TOO_LONG',
PCLZIP_ERR_INVALID_ZIP => 'PCLZIP_ERR_INVALID_ZIP',
PCLZIP_ERR_BAD_EXTRACTED_FILE => 'PCLZIP_ERR_BAD_EXTRACTED_FILE',
PCLZIP_ERR_DIR_CREATE_FAIL => 'PCLZIP_ERR_DIR_CREATE_FAIL',
PCLZIP_ERR_BAD_EXTENSION => 'PCLZIP_ERR_BAD_EXTENSION',
PCLZIP_ERR_BAD_FORMAT => 'PCLZIP_ERR_BAD_FORMAT',
PCLZIP_ERR_DELETE_FILE_FAIL => 'PCLZIP_ERR_DELETE_FILE_FAIL',
PCLZIP_ERR_RENAME_FILE_FAIL => 'PCLZIP_ERR_RENAME_FILE_FAIL',
PCLZIP_ERR_BAD_CHECKSUM => 'PCLZIP_ERR_BAD_CHECKSUM',
PCLZIP_ERR_INVALID_ARCHIVE_ZIP => 'PCLZIP_ERR_INVALID_ARCHIVE_ZIP',
PCLZIP_ERR_MISSING_OPTION_VALUE => 'PCLZIP_ERR_MISSING_OPTION_VALUE',
PCLZIP_ERR_INVALID_OPTION_VALUE => 'PCLZIP_ERR_INVALID_OPTION_VALUE',
PCLZIP_ERR_UNSUPPORTED_COMPRESSION => 'PCLZIP_ERR_UNSUPPORTED_COMPRESSION',
PCLZIP_ERR_UNSUPPORTED_ENCRYPTION => 'PCLZIP_ERR_UNSUPPORTED_ENCRYPTION'
, PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE => 'PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE'
, PCLZIP_ERR_DIRECTORY_RESTRICTION => 'PCLZIP_ERR_DIRECTORY_RESTRICTION'
);
if (isset($v_name[$this->error_code])) {
$v_value = $v_name[$this->error_code];
} else {
$v_value = 'NoName';
}
if ($p_with_code) {
return($v_value . ' (' . $this->error_code . ')');
} else {
return($v_value);
}
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : errorInfo()
// Description :
// Parameters :
// --------------------------------------------------------------------------------
function errorInfo($p_full = false) {
if (PCLZIP_ERROR_EXTERNAL == 1) {
return(PclErrorString());
} else {
if ($p_full) {
return($this->errorName(true) . " : " . $this->error_string);
} else {
return($this->error_string . " [code " . $this->error_code . "]");
}
}
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// ***** UNDER THIS LINE ARE DEFINED PRIVATE INTERNAL FUNCTIONS *****
// ***** *****
// ***** THESES FUNCTIONS MUST NOT BE USED DIRECTLY *****
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privCheckFormat()
// Description :
// This method check that the archive exists and is a valid zip archive.
// Several level of check exists. (futur)
// Parameters :
// $p_level : Level of check. Default 0.
// 0 : Check the first bytes (magic codes) (default value))
// 1 : 0 + Check the central directory (futur)
// 2 : 1 + Check each file header (futur)
// Return Values :
// true on success,
// false on error, the error code is set.
// --------------------------------------------------------------------------------
function privCheckFormat($p_level = 0) {
$v_result = true;
// ----- Reset the file system cache
clearstatcache();
// ----- Reset the error handler
$this->privErrorReset();
// ----- Look if the file exits
if (!is_file($this->zipname)) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_FILE, "Missing archive file '" . $this->zipname . "'");
return(false);
}
// ----- Check that the file is readeable
if (!is_readable($this->zipname)) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, "Unable to read archive '" . $this->zipname . "'");
return(false);
}
// ----- Check the magic code
// TBC
// ----- Check the central header
// TBC
// ----- Check each file header
// TBC
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privParseOptions()
// Description :
// This internal methods reads the variable list of arguments ($p_options_list,
// $p_size) and generate an array with the options and values ($v_result_list).
// $v_requested_options contains the options that can be present and those that
// must be present.
// $v_requested_options is an array, with the option value as key, and 'optional',
// or 'mandatory' as value.
// Parameters :
// See above.
// Return Values :
// 1 on success.
// 0 on failure.
// --------------------------------------------------------------------------------
function privParseOptions(&$p_options_list, $p_size, &$v_result_list, $v_requested_options = false) {
$v_result = 1;
// ----- Read the options
$i = 0;
while ($i < $p_size) {
// ----- Check if the option is supported
if (!isset($v_requested_options[$p_options_list[$i]])) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid optional parameter '" . $p_options_list[$i] . "' for this method");
// ----- Return
return PclZip::errorCode();
}
// ----- Look for next option
switch ($p_options_list[$i]) {
// ----- Look for options that request a path value
case PCLZIP_OPT_PATH :
case PCLZIP_OPT_REMOVE_PATH :
case PCLZIP_OPT_ADD_PATH :
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Get the value
$v_result_list[$p_options_list[$i]] = PclZipUtilTranslateWinPath($p_options_list[$i + 1], FALSE);
$i++;
break;
case PCLZIP_OPT_TEMP_FILE_THRESHOLD :
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
return PclZip::errorCode();
}
// ----- Check for incompatible options
if (isset($v_result_list[PCLZIP_OPT_TEMP_FILE_OFF])) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Option '" . PclZipUtilOptionText($p_options_list[$i]) . "' can not be used with option 'PCLZIP_OPT_TEMP_FILE_OFF'");
return PclZip::errorCode();
}
// ----- Check the value
$v_value = $p_options_list[$i + 1];
if ((!is_integer($v_value)) || ($v_value < 0)) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_OPTION_VALUE, "Integer expected for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
return PclZip::errorCode();
}
// ----- Get the value (and convert it in bytes)
$v_result_list[$p_options_list[$i]] = $v_value * 1048576;
$i++;
break;
case PCLZIP_OPT_TEMP_FILE_ON :
// ----- Check for incompatible options
if (isset($v_result_list[PCLZIP_OPT_TEMP_FILE_OFF])) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Option '" . PclZipUtilOptionText($p_options_list[$i]) . "' can not be used with option 'PCLZIP_OPT_TEMP_FILE_OFF'");
return PclZip::errorCode();
}
$v_result_list[$p_options_list[$i]] = true;
break;
case PCLZIP_OPT_TEMP_FILE_OFF :
// ----- Check for incompatible options
if (isset($v_result_list[PCLZIP_OPT_TEMP_FILE_ON])) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Option '" . PclZipUtilOptionText($p_options_list[$i]) . "' can not be used with option 'PCLZIP_OPT_TEMP_FILE_ON'");
return PclZip::errorCode();
}
// ----- Check for incompatible options
if (isset($v_result_list[PCLZIP_OPT_TEMP_FILE_THRESHOLD])) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Option '" . PclZipUtilOptionText($p_options_list[$i]) . "' can not be used with option 'PCLZIP_OPT_TEMP_FILE_THRESHOLD'");
return PclZip::errorCode();
}
$v_result_list[$p_options_list[$i]] = true;
break;
case PCLZIP_OPT_EXTRACT_DIR_RESTRICTION :
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Get the value
if (is_string($p_options_list[$i + 1]) && ($p_options_list[$i + 1] != '')) {
$v_result_list[$p_options_list[$i]] = PclZipUtilTranslateWinPath($p_options_list[$i + 1], FALSE);
$i++;
} else {
}
break;
// ----- Look for options that request an array of string for value
case PCLZIP_OPT_BY_NAME :
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Get the value
if (is_string($p_options_list[$i + 1])) {
$v_result_list[$p_options_list[$i]][0] = $p_options_list[$i + 1];
} else if (is_array($p_options_list[$i + 1])) {
$v_result_list[$p_options_list[$i]] = $p_options_list[$i + 1];
} else {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_OPTION_VALUE, "Wrong parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
$i++;
break;
// ----- Look for options that request an EREG or PREG expression
case PCLZIP_OPT_BY_EREG :
// ereg() is deprecated starting with PHP 5.3. Move PCLZIP_OPT_BY_EREG
// to PCLZIP_OPT_BY_PREG
$p_options_list[$i] = PCLZIP_OPT_BY_PREG;
case PCLZIP_OPT_BY_PREG :
//case PCLZIP_OPT_CRYPT :
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Get the value
if (is_string($p_options_list[$i + 1])) {
$v_result_list[$p_options_list[$i]] = $p_options_list[$i + 1];
} else {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_OPTION_VALUE, "Wrong parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
$i++;
break;
// ----- Look for options that takes a string
case PCLZIP_OPT_COMMENT :
case PCLZIP_OPT_ADD_COMMENT :
case PCLZIP_OPT_PREPEND_COMMENT :
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '"
. PclZipUtilOptionText($p_options_list[$i])
. "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Get the value
if (is_string($p_options_list[$i + 1])) {
$v_result_list[$p_options_list[$i]] = $p_options_list[$i + 1];
} else {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_OPTION_VALUE, "Wrong parameter value for option '"
. PclZipUtilOptionText($p_options_list[$i])
. "'");
// ----- Return
return PclZip::errorCode();
}
$i++;
break;
// ----- Look for options that request an array of index
case PCLZIP_OPT_BY_INDEX :
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Get the value
$v_work_list = array();
if (is_string($p_options_list[$i + 1])) {
// ----- Remove spaces
$p_options_list[$i + 1] = strtr($p_options_list[$i + 1], ' ', '');
// ----- Parse items
$v_work_list = explode(",", $p_options_list[$i + 1]);
} else if (is_integer($p_options_list[$i + 1])) {
$v_work_list[0] = $p_options_list[$i + 1] . '-' . $p_options_list[$i + 1];
} else if (is_array($p_options_list[$i + 1])) {
$v_work_list = $p_options_list[$i + 1];
} else {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_OPTION_VALUE, "Value must be integer, string or array for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Reduce the index list
// each index item in the list must be a couple with a start and
// an end value : [0,3], [5-5], [8-10], ...
// ----- Check the format of each item
$v_sort_flag = false;
$v_sort_value = 0;
for ($j = 0; $j < sizeof($v_work_list); $j++) {
// ----- Explode the item
$v_item_list = explode("-", $v_work_list[$j]);
$v_size_item_list = sizeof($v_item_list);
// ----- TBC : Here we might check that each item is a
// real integer ...
// ----- Look for single value
if ($v_size_item_list == 1) {
// ----- Set the option value
$v_result_list[$p_options_list[$i]][$j]['start'] = $v_item_list[0];
$v_result_list[$p_options_list[$i]][$j]['end'] = $v_item_list[0];
} elseif ($v_size_item_list == 2) {
// ----- Set the option value
$v_result_list[$p_options_list[$i]][$j]['start'] = $v_item_list[0];
$v_result_list[$p_options_list[$i]][$j]['end'] = $v_item_list[1];
} else {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_OPTION_VALUE, "Too many values in index range for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Look for list sort
if ($v_result_list[$p_options_list[$i]][$j]['start'] < $v_sort_value) {
$v_sort_flag = true;
// ----- TBC : An automatic sort should be writen ...
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_OPTION_VALUE, "Invalid order of index range for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
$v_sort_value = $v_result_list[$p_options_list[$i]][$j]['start'];
}
// ----- Sort the items
if ($v_sort_flag) {
// TBC : To Be Completed
}
// ----- Next option
$i++;
break;
// ----- Look for options that request no value
case PCLZIP_OPT_REMOVE_ALL_PATH :
case PCLZIP_OPT_EXTRACT_AS_STRING :
case PCLZIP_OPT_NO_COMPRESSION :
case PCLZIP_OPT_EXTRACT_IN_OUTPUT :
case PCLZIP_OPT_REPLACE_NEWER :
case PCLZIP_OPT_STOP_ON_ERROR :
$v_result_list[$p_options_list[$i]] = true;
break;
// ----- Look for options that request an octal value
case PCLZIP_OPT_SET_CHMOD :
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Get the value
$v_result_list[$p_options_list[$i]] = $p_options_list[$i + 1];
$i++;
break;
// ----- Look for options that request a call-back
case PCLZIP_CB_PRE_EXTRACT :
case PCLZIP_CB_POST_EXTRACT :
case PCLZIP_CB_PRE_ADD :
case PCLZIP_CB_POST_ADD :
/* for futur use
case PCLZIP_CB_PRE_DELETE :
case PCLZIP_CB_POST_DELETE :
case PCLZIP_CB_PRE_LIST :
case PCLZIP_CB_POST_LIST :
*/
// ----- Check the number of parameters
if (($i + 1) >= $p_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_OPTION_VALUE, "Missing parameter value for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Get the value
$v_function_name = $p_options_list[$i + 1];
// ----- Check that the value is a valid existing function
if (!function_exists($v_function_name)) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_OPTION_VALUE, "Function '" . $v_function_name . "()' is not an existing function for option '" . PclZipUtilOptionText($p_options_list[$i]) . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Set the attribute
$v_result_list[$p_options_list[$i]] = $v_function_name;
$i++;
break;
default :
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Unknown parameter '"
. $p_options_list[$i] . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Next options
$i++;
}
// ----- Look for mandatory options
if ($v_requested_options !== false) {
for ($key = reset($v_requested_options); $key = key($v_requested_options); $key = next($v_requested_options)) {
// ----- Look for mandatory option
if ($v_requested_options[$key] == 'mandatory') {
// ----- Look if present
if (!isset($v_result_list[$key])) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Missing mandatory parameter " . PclZipUtilOptionText($key) . "(" . $key . ")");
// ----- Return
return PclZip::errorCode();
}
}
}
}
// ----- Look for default values
if (!isset($v_result_list[PCLZIP_OPT_TEMP_FILE_THRESHOLD])) {
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privOptionDefaultThreshold()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privOptionDefaultThreshold(&$p_options) {
$v_result = 1;
if (isset($p_options[PCLZIP_OPT_TEMP_FILE_THRESHOLD]) || isset($p_options[PCLZIP_OPT_TEMP_FILE_OFF])) {
return $v_result;
}
// ----- Get 'memory_limit' configuration value
$v_memory_limit = ini_get('memory_limit');
$v_memory_limit = trim($v_memory_limit);
$last = strtolower(substr($v_memory_limit, -1));
if ($last == 'g')
//$v_memory_limit = $v_memory_limit*1024*1024*1024;
$v_memory_limit = $v_memory_limit * 1073741824;
if ($last == 'm')
//$v_memory_limit = $v_memory_limit*1024*1024;
$v_memory_limit = $v_memory_limit * 1048576;
if ($last == 'k')
$v_memory_limit = $v_memory_limit * 1024;
$p_options[PCLZIP_OPT_TEMP_FILE_THRESHOLD] = floor($v_memory_limit * PCLZIP_TEMPORARY_FILE_RATIO);
// ----- Sanity check : No threshold if value lower than 1M
if ($p_options[PCLZIP_OPT_TEMP_FILE_THRESHOLD] < 1048576) {
unset($p_options[PCLZIP_OPT_TEMP_FILE_THRESHOLD]);
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privFileDescrParseAtt()
// Description :
// Parameters :
// Return Values :
// 1 on success.
// 0 on failure.
// --------------------------------------------------------------------------------
function privFileDescrParseAtt(&$p_file_list, &$p_filedescr, $v_options, $v_requested_options = false) {
$v_result = 1;
// ----- For each file in the list check the attributes
foreach ($p_file_list as $v_key => $v_value) {
// ----- Check if the option is supported
if (!isset($v_requested_options[$v_key])) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid file attribute '" . $v_key . "' for this file");
// ----- Return
return PclZip::errorCode();
}
// ----- Look for attribute
switch ($v_key) {
case PCLZIP_ATT_FILE_NAME :
if (!is_string($v_value)) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE, "Invalid type " . gettype($v_value) . ". String expected for attribute '" . PclZipUtilOptionText($v_key) . "'");
return PclZip::errorCode();
}
$p_filedescr['filename'] = PclZipUtilPathReduction($v_value);
if ($p_filedescr['filename'] == '') {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE, "Invalid empty filename for attribute '" . PclZipUtilOptionText($v_key) . "'");
return PclZip::errorCode();
}
break;
case PCLZIP_ATT_FILE_NEW_SHORT_NAME :
if (!is_string($v_value)) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE, "Invalid type " . gettype($v_value) . ". String expected for attribute '" . PclZipUtilOptionText($v_key) . "'");
return PclZip::errorCode();
}
$p_filedescr['new_short_name'] = PclZipUtilPathReduction($v_value);
if ($p_filedescr['new_short_name'] == '') {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE, "Invalid empty short filename for attribute '" . PclZipUtilOptionText($v_key) . "'");
return PclZip::errorCode();
}
break;
case PCLZIP_ATT_FILE_NEW_FULL_NAME :
if (!is_string($v_value)) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE, "Invalid type " . gettype($v_value) . ". String expected for attribute '" . PclZipUtilOptionText($v_key) . "'");
return PclZip::errorCode();
}
$p_filedescr['new_full_name'] = PclZipUtilPathReduction($v_value);
if ($p_filedescr['new_full_name'] == '') {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE, "Invalid empty full filename for attribute '" . PclZipUtilOptionText($v_key) . "'");
return PclZip::errorCode();
}
break;
// ----- Look for options that takes a string
case PCLZIP_ATT_FILE_COMMENT :
if (!is_string($v_value)) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE, "Invalid type " . gettype($v_value) . ". String expected for attribute '" . PclZipUtilOptionText($v_key) . "'");
return PclZip::errorCode();
}
$p_filedescr['comment'] = $v_value;
break;
case PCLZIP_ATT_FILE_MTIME :
if (!is_integer($v_value)) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ATTRIBUTE_VALUE, "Invalid type " . gettype($v_value) . ". Integer expected for attribute '" . PclZipUtilOptionText($v_key) . "'");
return PclZip::errorCode();
}
$p_filedescr['mtime'] = $v_value;
break;
case PCLZIP_ATT_FILE_CONTENT :
$p_filedescr['content'] = $v_value;
break;
default :
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Unknown parameter '" . $v_key . "'");
// ----- Return
return PclZip::errorCode();
}
// ----- Look for mandatory options
if ($v_requested_options !== false) {
for ($key = reset($v_requested_options); $key = key($v_requested_options); $key = next($v_requested_options)) {
// ----- Look for mandatory option
if ($v_requested_options[$key] == 'mandatory') {
// ----- Look if present
if (!isset($p_file_list[$key])) {
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Missing mandatory parameter " . PclZipUtilOptionText($key) . "(" . $key . ")");
return PclZip::errorCode();
}
}
}
}
// end foreach
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privFileDescrExpand()
// Description :
// This method look for each item of the list to see if its a file, a folder
// or a string to be added as file. For any other type of files (link, other)
// just ignore the item.
// Then prepare the information that will be stored for that file.
// When its a folder, expand the folder with all the files that are in that
// folder (recursively).
// Parameters :
// Return Values :
// 1 on success.
// 0 on failure.
// --------------------------------------------------------------------------------
function privFileDescrExpand(&$p_filedescr_list, &$p_options) {
$v_result = 1;
// ----- Create a result list
$v_result_list = array();
// ----- Look each entry
for ($i = 0; $i < sizeof($p_filedescr_list); $i++) {
// ----- Get filedescr
$v_descr = $p_filedescr_list[$i];
// ----- Reduce the filename
$v_descr['filename'] = PclZipUtilTranslateWinPath($v_descr['filename'], false);
$v_descr['filename'] = PclZipUtilPathReduction($v_descr['filename']);
// ----- Look for real file or folder
if (file_exists($v_descr['filename'])) {
if (@is_file($v_descr['filename'])) {
$v_descr['type'] = 'file';
} else if (@is_dir($v_descr['filename'])) {
$v_descr['type'] = 'folder';
} else if (@is_link($v_descr['filename'])) {
// skip
continue;
} else {
// skip
continue;
}
}
// ----- Look for string added as file
else if (isset($v_descr['content'])) {
$v_descr['type'] = 'virtual_file';
}
// ----- Missing file
else {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_MISSING_FILE, "File '" . $v_descr['filename'] . "' does not exist");
// ----- Return
return PclZip::errorCode();
}
// ----- Calculate the stored filename
$this->privCalculateStoredFilename($v_descr, $p_options);
// ----- Add the descriptor in result list
$v_result_list[sizeof($v_result_list)] = $v_descr;
// ----- Look for folder
if ($v_descr['type'] == 'folder') {
// ----- List of items in folder
$v_dirlist_descr = array();
$v_dirlist_nb = 0;
if ($v_folder_handler = @opendir($v_descr['filename'])) {
while (($v_item_handler = @readdir($v_folder_handler)) !== false) {
// ----- Skip '.' and '..'
if (($v_item_handler == '.') || ($v_item_handler == '..')) {
continue;
}
// ----- Compose the full filename
$v_dirlist_descr[$v_dirlist_nb]['filename'] = $v_descr['filename'] . '/' . $v_item_handler;
// ----- Look for different stored filename
// Because the name of the folder was changed, the name of the
// files/sub-folders also change
if (($v_descr['stored_filename'] != $v_descr['filename']) && (!isset($p_options[PCLZIP_OPT_REMOVE_ALL_PATH]))) {
if ($v_descr['stored_filename'] != '') {
$v_dirlist_descr[$v_dirlist_nb]['new_full_name'] = $v_descr['stored_filename'] . '/' . $v_item_handler;
} else {
$v_dirlist_descr[$v_dirlist_nb]['new_full_name'] = $v_item_handler;
}
}
$v_dirlist_nb++;
}
@closedir($v_folder_handler);
} else {
// TBC : unable to open folder in read mode
}
// ----- Expand each element of the list
if ($v_dirlist_nb != 0) {
// ----- Expand
if (($v_result = $this->privFileDescrExpand($v_dirlist_descr, $p_options)) != 1) {
return $v_result;
}
// ----- Concat the resulting list
$v_result_list = array_merge($v_result_list, $v_dirlist_descr);
} else {
}
// ----- Free local array
unset($v_dirlist_descr);
}
}
// ----- Get the result list
$p_filedescr_list = $v_result_list;
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privCreate()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privCreate($p_filedescr_list, &$p_result_list, &$p_options) {
$v_result = 1;
$v_list_detail = array();
// ----- Magic quotes trick
$this->privDisableMagicQuotes();
// ----- Open the file in write mode
if (($v_result = $this->privOpenFd('wb')) != 1) {
// ----- Return
return $v_result;
}
// ----- Add the list of files
$v_result = $this->privAddList($p_filedescr_list, $p_result_list, $p_options);
// ----- Close
$this->privCloseFd();
// ----- Magic quotes trick
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privAdd()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privAdd($p_filedescr_list, &$p_result_list, &$p_options) {
$v_result = 1;
$v_list_detail = array();
// ----- Look if the archive exists or is empty
if ((!is_file($this->zipname)) || (filesize($this->zipname) == 0)) {
// ----- Do a create
$v_result = $this->privCreate($p_filedescr_list, $p_result_list, $p_options);
// ----- Return
return $v_result;
}
// ----- Magic quotes trick
$this->privDisableMagicQuotes();
// ----- Open the zip file
if (($v_result = $this->privOpenFd('rb')) != 1) {
// ----- Magic quotes trick
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_result;
}
// ----- Read the central directory informations
$v_central_dir = array();
if (($v_result = $this->privReadEndCentralDir($v_central_dir)) != 1) {
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result;
}
// ----- Go to beginning of File
@rewind($this->zip_fd);
// ----- Creates a temporay file
$v_zip_temp_name = PCLZIP_TEMPORARY_DIR . uniqid('pclzip-') . '.tmp';
// ----- Open the temporary file in write mode
if (($v_zip_temp_fd = @fopen($v_zip_temp_name, 'wb')) == 0) {
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open temporary file '' . $v_zip_temp_name . '' in binary write mode');
// ----- Return
return PclZip::errorCode();
}
// ----- Copy the files from the archive to the temporary file
// TBC : Here I should better append the file and go back to erase the central dir
$v_size = $v_central_dir['offset'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = fread($this->zip_fd, $v_read_size);
@fwrite($v_zip_temp_fd, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Swap the file descriptor
// Here is a trick : I swap the temporary fd with the zip fd, in order to use
// the following methods on the temporary fil and not the real archive
$v_swap = $this->zip_fd;
$this->zip_fd = $v_zip_temp_fd;
$v_zip_temp_fd = $v_swap;
// ----- Add the files
$v_header_list = array();
if (($v_result = $this->privAddFileList($p_filedescr_list, $v_header_list, $p_options)) != 1) {
fclose($v_zip_temp_fd);
$this->privCloseFd();
@unlink($v_zip_temp_name);
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_result;
}
// ----- Store the offset of the central dir
$v_offset = @ftell($this->zip_fd);
// ----- Copy the block of file headers from the old archive
$v_size = $v_central_dir['size'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($v_zip_temp_fd, $v_read_size);
@fwrite($this->zip_fd, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Create the Central Dir files header
for ($i = 0, $v_count = 0; $i < sizeof($v_header_list); $i++) {
// ----- Create the file header
if ($v_header_list[$i]['status'] == 'ok') {
if (($v_result = $this->privWriteCentralFileHeader($v_header_list[$i])) != 1) {
fclose($v_zip_temp_fd);
$this->privCloseFd();
@unlink($v_zip_temp_name);
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_result;
}
$v_count++;
}
// ----- Transform the header to a 'usable' info
$this->privConvertHeader2FileInfo($v_header_list[$i], $p_result_list[$i]);
}
// ----- Zip file comment
$v_comment = $v_central_dir['comment'];
if (isset($p_options[PCLZIP_OPT_COMMENT])) {
$v_comment = $p_options[PCLZIP_OPT_COMMENT];
}
if (isset($p_options[PCLZIP_OPT_ADD_COMMENT])) {
$v_comment = $v_comment . $p_options[PCLZIP_OPT_ADD_COMMENT];
}
if (isset($p_options[PCLZIP_OPT_PREPEND_COMMENT])) {
$v_comment = $p_options[PCLZIP_OPT_PREPEND_COMMENT] . $v_comment;
}
// ----- Calculate the size of the central header
$v_size = @ftell($this->zip_fd) - $v_offset;
// ----- Create the central dir footer
if (($v_result = $this->privWriteCentralHeader($v_count + $v_central_dir['entries'], $v_size, $v_offset, $v_comment)) != 1) {
// ----- Reset the file list
unset($v_header_list);
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_result;
}
// ----- Swap back the file descriptor
$v_swap = $this->zip_fd;
$this->zip_fd = $v_zip_temp_fd;
$v_zip_temp_fd = $v_swap;
// ----- Close
$this->privCloseFd();
// ----- Close the temporary file
@fclose($v_zip_temp_fd);
// ----- Magic quotes trick
$this->privSwapBackMagicQuotes();
// ----- Delete the zip file
// TBC : I should test the result ...
@unlink($this->zipname);
// ----- Rename the temporary file
// TBC : I should test the result ...
//@rename($v_zip_temp_name, $this->zipname);
PclZipUtilRename($v_zip_temp_name, $this->zipname);
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privOpenFd()
// Description :
// Parameters :
// --------------------------------------------------------------------------------
function privOpenFd($p_mode) {
$v_result = 1;
// ----- Look if already open
if ($this->zip_fd != 0) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Zip file '' . $this->zipname . '' already open');
// ----- Return
return PclZip::errorCode();
}
// ----- Open the zip file
if (($this->zip_fd = @fopen($this->zipname, $p_mode)) == 0) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open archive '' . $this->zipname . '' in ' . $p_mode . ' mode');
// ----- Return
return PclZip::errorCode();
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privCloseFd()
// Description :
// Parameters :
// --------------------------------------------------------------------------------
function privCloseFd() {
$v_result = 1;
if ($this->zip_fd != 0)
@fclose($this->zip_fd);
$this->zip_fd = 0;
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privAddList()
// Description :
// $p_add_dir and $p_remove_dir will give the ability to memorize a path which is
// different from the real path of the file. This is usefull if you want to have PclTar
// running in any directory, and memorize relative path from an other directory.
// Parameters :
// $p_list : An array containing the file or directory names to add in the tar
// $p_result_list : list of added files with their properties (specially the status field)
// $p_add_dir : Path to add in the filename path archived
// $p_remove_dir : Path to remove in the filename path archived
// Return Values :
// --------------------------------------------------------------------------------
// function privAddList($p_list, &$p_result_list, $p_add_dir, $p_remove_dir, $p_remove_all_dir, &$p_options)
function privAddList($p_filedescr_list, &$p_result_list, &$p_options) {
$v_result = 1;
// ----- Add the files
$v_header_list = array();
if (($v_result = $this->privAddFileList($p_filedescr_list, $v_header_list, $p_options)) != 1) {
// ----- Return
return $v_result;
}
// ----- Store the offset of the central dir
$v_offset = @ftell($this->zip_fd);
// ----- Create the Central Dir files header
for ($i = 0, $v_count = 0; $i < sizeof($v_header_list); $i++) {
// ----- Create the file header
if ($v_header_list[$i]['status'] == 'ok') {
if (($v_result = $this->privWriteCentralFileHeader($v_header_list[$i])) != 1) {
// ----- Return
return $v_result;
}
$v_count++;
}
// ----- Transform the header to a 'usable' info
$this->privConvertHeader2FileInfo($v_header_list[$i], $p_result_list[$i]);
}
// ----- Zip file comment
$v_comment = '';
if (isset($p_options[PCLZIP_OPT_COMMENT])) {
$v_comment = $p_options[PCLZIP_OPT_COMMENT];
}
// ----- Calculate the size of the central header
$v_size = @ftell($this->zip_fd) - $v_offset;
// ----- Create the central dir footer
if (($v_result = $this->privWriteCentralHeader($v_count, $v_size, $v_offset, $v_comment)) != 1) {
// ----- Reset the file list
unset($v_header_list);
// ----- Return
return $v_result;
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privAddFileList()
// Description :
// Parameters :
// $p_filedescr_list : An array containing the file description
// or directory names to add in the zip
// $p_result_list : list of added files with their properties (specially the status field)
// Return Values :
// --------------------------------------------------------------------------------
function privAddFileList($p_filedescr_list, &$p_result_list, &$p_options) {
$v_result = 1;
$v_header = array();
// ----- Recuperate the current number of elt in list
$v_nb = sizeof($p_result_list);
// ----- Loop on the files
for ($j = 0; ($j < sizeof($p_filedescr_list)) && ($v_result == 1); $j++) {
// ----- Format the filename
$p_filedescr_list[$j]['filename'] = PclZipUtilTranslateWinPath($p_filedescr_list[$j]['filename'], false);
// ----- Skip empty file names
// TBC : Can this be possible ? not checked in DescrParseAtt ?
if ($p_filedescr_list[$j]['filename'] == "") {
continue;
}
// ----- Check the filename
if (($p_filedescr_list[$j]['type'] != 'virtual_file') && (!file_exists($p_filedescr_list[$j]['filename']))) {
PclZip::privErrorLog(PCLZIP_ERR_MISSING_FILE, "File '" . $p_filedescr_list[$j]['filename'] . "' does not exist");
return PclZip::errorCode();
}
// ----- Look if it is a file or a dir with no all path remove option
// or a dir with all its path removed
// if ( (is_file($p_filedescr_list[$j]['filename']))
// || ( is_dir($p_filedescr_list[$j]['filename'])
if (($p_filedescr_list[$j]['type'] == 'file') || ($p_filedescr_list[$j]['type'] == 'virtual_file') || ( ($p_filedescr_list[$j]['type'] == 'folder') && (!isset($p_options[PCLZIP_OPT_REMOVE_ALL_PATH]) || !$p_options[PCLZIP_OPT_REMOVE_ALL_PATH]))
) {
// ----- Add the file
$v_result = $this->privAddFile($p_filedescr_list[$j], $v_header, $p_options);
if ($v_result != 1) {
return $v_result;
}
// ----- Store the file infos
$p_result_list[$v_nb++] = $v_header;
}
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privAddFile()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privAddFile($p_filedescr, &$p_header, &$p_options) {
$v_result = 1;
// ----- Working variable
$p_filename = $p_filedescr['filename'];
// TBC : Already done in the fileAtt check ... ?
if ($p_filename == "") {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_PARAMETER, "Invalid file list parameter (invalid or empty list)");
// ----- Return
return PclZip::errorCode();
}
// ----- Look for a stored different filename
/* TBC : Removed
if (isset($p_filedescr['stored_filename'])) {
$v_stored_filename = $p_filedescr['stored_filename'];
}
else {
$v_stored_filename = $p_filedescr['stored_filename'];
}
*/
// ----- Set the file properties
clearstatcache();
$p_header['version'] = 20;
$p_header['version_extracted'] = 10;
$p_header['flag'] = 0;
$p_header['compression'] = 0;
$p_header['crc'] = 0;
$p_header['compressed_size'] = 0;
$p_header['filename_len'] = strlen($p_filename);
$p_header['extra_len'] = 0;
$p_header['disk'] = 0;
$p_header['internal'] = 0;
$p_header['offset'] = 0;
$p_header['filename'] = $p_filename;
// TBC : Removed $p_header['stored_filename'] = $v_stored_filename;
$p_header['stored_filename'] = $p_filedescr['stored_filename'];
$p_header['extra'] = '';
$p_header['status'] = 'ok';
$p_header['index'] = -1;
// ----- Look for regular file
if ($p_filedescr['type'] == 'file') {
$p_header['external'] = 0x00000000;
$p_header['size'] = filesize($p_filename);
}
// ----- Look for regular folder
else if ($p_filedescr['type'] == 'folder') {
$p_header['external'] = 0x00000010;
$p_header['mtime'] = filemtime($p_filename);
$p_header['size'] = filesize($p_filename);
}
// ----- Look for virtual file
else if ($p_filedescr['type'] == 'virtual_file') {
$p_header['external'] = 0x00000000;
$p_header['size'] = strlen($p_filedescr['content']);
}
// ----- Look for filetime
if (isset($p_filedescr['mtime'])) {
$p_header['mtime'] = $p_filedescr['mtime'];
} else if ($p_filedescr['type'] == 'virtual_file') {
$p_header['mtime'] = time();
} else {
$p_header['mtime'] = filemtime($p_filename);
}
// ------ Look for file comment
if (isset($p_filedescr['comment'])) {
$p_header['comment_len'] = strlen($p_filedescr['comment']);
$p_header['comment'] = $p_filedescr['comment'];
} else {
$p_header['comment_len'] = 0;
$p_header['comment'] = '';
}
// ----- Look for pre-add callback
if (isset($p_options[PCLZIP_CB_PRE_ADD])) {
// ----- Generate a local information
$v_local_header = array();
$this->privConvertHeader2FileInfo($p_header, $v_local_header);
// ----- Call the callback
// Here I do not use call_user_func() because I need to send a reference to the
// header.
// eval('$v_result = '.$p_options[PCLZIP_CB_PRE_ADD].'(PCLZIP_CB_PRE_ADD, $v_local_header);');
$v_result = $p_options[PCLZIP_CB_PRE_ADD](PCLZIP_CB_PRE_ADD, $v_local_header);
if ($v_result == 0) {
// ----- Change the file status
$p_header['status'] = "skipped";
$v_result = 1;
}
// ----- Update the informations
// Only some fields can be modified
if ($p_header['stored_filename'] != $v_local_header['stored_filename']) {
$p_header['stored_filename'] = PclZipUtilPathReduction($v_local_header['stored_filename']);
}
}
// ----- Look for empty stored filename
if ($p_header['stored_filename'] == "") {
$p_header['status'] = "filtered";
}
// ----- Check the path length
if (strlen($p_header['stored_filename']) > 0xFF) {
$p_header['status'] = 'filename_too_long';
}
// ----- Look if no error, or file not skipped
if ($p_header['status'] == 'ok') {
// ----- Look for a file
if ($p_filedescr['type'] == 'file') {
// ----- Look for using temporary file to zip
if ((!isset($p_options[PCLZIP_OPT_TEMP_FILE_OFF])) && (isset($p_options[PCLZIP_OPT_TEMP_FILE_ON]) || (isset($p_options[PCLZIP_OPT_TEMP_FILE_THRESHOLD]) && ($p_options[PCLZIP_OPT_TEMP_FILE_THRESHOLD] <= $p_header['size'])) )) {
$v_result = $this->privAddFileUsingTempFile($p_filedescr, $p_header, $p_options);
if ($v_result < PCLZIP_ERR_NO_ERROR) {
return $v_result;
}
}
// ----- Use "in memory" zip algo
else {
// ----- Open the source file
if (($v_file = @fopen($p_filename, "rb")) == 0) {
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, "Unable to open file '$p_filename' in binary read mode");
return PclZip::errorCode();
}
// ----- Read the file content
$v_content = @fread($v_file, $p_header['size']);
// ----- Close the file
@fclose($v_file);
// ----- Calculate the CRC
$p_header['crc'] = @crc32($v_content);
// ----- Look for no compression
if ($p_options[PCLZIP_OPT_NO_COMPRESSION]) {
// ----- Set header parameters
$p_header['compressed_size'] = $p_header['size'];
$p_header['compression'] = 0;
}
// ----- Look for normal compression
else {
// ----- Compress the content
$v_content = @gzdeflate($v_content);
// ----- Set header parameters
$p_header['compressed_size'] = strlen($v_content);
$p_header['compression'] = 8;
}
// ----- Call the header generation
if (($v_result = $this->privWriteFileHeader($p_header)) != 1) {
@fclose($v_file);
return $v_result;
}
// ----- Write the compressed (or not) content
@fwrite($this->zip_fd, $v_content, $p_header['compressed_size']);
}
}
// ----- Look for a virtual file (a file from string)
else if ($p_filedescr['type'] == 'virtual_file') {
$v_content = $p_filedescr['content'];
// ----- Calculate the CRC
$p_header['crc'] = @crc32($v_content);
// ----- Look for no compression
if ($p_options[PCLZIP_OPT_NO_COMPRESSION]) {
// ----- Set header parameters
$p_header['compressed_size'] = $p_header['size'];
$p_header['compression'] = 0;
}
// ----- Look for normal compression
else {
// ----- Compress the content
$v_content = @gzdeflate($v_content);
// ----- Set header parameters
$p_header['compressed_size'] = strlen($v_content);
$p_header['compression'] = 8;
}
// ----- Call the header generation
if (($v_result = $this->privWriteFileHeader($p_header)) != 1) {
@fclose($v_file);
return $v_result;
}
// ----- Write the compressed (or not) content
@fwrite($this->zip_fd, $v_content, $p_header['compressed_size']);
}
// ----- Look for a directory
else if ($p_filedescr['type'] == 'folder') {
// ----- Look for directory last '/'
if (@substr($p_header['stored_filename'], -1) != '/') {
$p_header['stored_filename'] .= '/';
}
// ----- Set the file properties
$p_header['size'] = 0;
//$p_header['external'] = 0x41FF0010; // Value for a folder : to be checked
$p_header['external'] = 0x00000010; // Value for a folder : to be checked
// ----- Call the header generation
if (($v_result = $this->privWriteFileHeader($p_header)) != 1) {
return $v_result;
}
}
}
// ----- Look for post-add callback
if (isset($p_options[PCLZIP_CB_POST_ADD])) {
// ----- Generate a local information
$v_local_header = array();
$this->privConvertHeader2FileInfo($p_header, $v_local_header);
// ----- Call the callback
// Here I do not use call_user_func() because I need to send a reference to the
// header.
// eval('$v_result = '.$p_options[PCLZIP_CB_POST_ADD].'(PCLZIP_CB_POST_ADD, $v_local_header);');
$v_result = $p_options[PCLZIP_CB_POST_ADD](PCLZIP_CB_POST_ADD, $v_local_header);
if ($v_result == 0) {
// ----- Ignored
$v_result = 1;
}
// ----- Update the informations
// Nothing can be modified
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privAddFileUsingTempFile()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privAddFileUsingTempFile($p_filedescr, &$p_header, &$p_options) {
$v_result = PCLZIP_ERR_NO_ERROR;
// ----- Working variable
$p_filename = $p_filedescr['filename'];
// ----- Open the source file
if (($v_file = @fopen($p_filename, "rb")) == 0) {
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, "Unable to open file '$p_filename' in binary read mode");
return PclZip::errorCode();
}
// ----- Creates a compressed temporary file
$v_gzip_temp_name = PCLZIP_TEMPORARY_DIR . uniqid('pclzip-') . '.gz';
if (($v_file_compressed = @gzopen($v_gzip_temp_name, "wb")) == 0) {
fclose($v_file);
PclZip::privErrorLog(PCLZIP_ERR_WRITE_OPEN_FAIL, 'Unable to open temporary file '' . $v_gzip_temp_name . '' in binary write mode');
return PclZip::errorCode();
}
// ----- Read the file by PCLZIP_READ_BLOCK_SIZE octets blocks
$v_size = filesize($p_filename);
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($v_file, $v_read_size);
//$v_binary_data = pack('a'.$v_read_size, $v_buffer);
@gzputs($v_file_compressed, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Close the file
@fclose($v_file);
@gzclose($v_file_compressed);
// ----- Check the minimum file size
if (filesize($v_gzip_temp_name) < 18) {
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'gzip temporary file '' . $v_gzip_temp_name . '' has invalid filesize - should be minimum 18 bytes');
return PclZip::errorCode();
}
// ----- Extract the compressed attributes
if (($v_file_compressed = @fopen($v_gzip_temp_name, "rb")) == 0) {
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open temporary file '' . $v_gzip_temp_name . '' in binary read mode');
return PclZip::errorCode();
}
// ----- Read the gzip file header
$v_binary_data = @fread($v_file_compressed, 10);
$v_data_header = unpack('a1id1/a1id2/a1cm/a1flag/Vmtime/a1xfl/a1os', $v_binary_data);
// ----- Check some parameters
$v_data_header['os'] = bin2hex($v_data_header['os']);
// ----- Read the gzip file footer
@fseek($v_file_compressed, filesize($v_gzip_temp_name) - 8);
$v_binary_data = @fread($v_file_compressed, 8);
$v_data_footer = unpack('Vcrc/Vcompressed_size', $v_binary_data);
// ----- Set the attributes
$p_header['compression'] = ord($v_data_header['cm']);
//$p_header['mtime'] = $v_data_header['mtime'];
$p_header['crc'] = $v_data_footer['crc'];
$p_header['compressed_size'] = filesize($v_gzip_temp_name) - 18;
// ----- Close the file
@fclose($v_file_compressed);
// ----- Call the header generation
if (($v_result = $this->privWriteFileHeader($p_header)) != 1) {
return $v_result;
}
// ----- Add the compressed data
if (($v_file_compressed = @fopen($v_gzip_temp_name, "rb")) == 0) {
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open temporary file '' . $v_gzip_temp_name . '' in binary read mode');
return PclZip::errorCode();
}
// ----- Read the file by PCLZIP_READ_BLOCK_SIZE octets blocks
fseek($v_file_compressed, 10);
$v_size = $p_header['compressed_size'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($v_file_compressed, $v_read_size);
//$v_binary_data = pack('a'.$v_read_size, $v_buffer);
@fwrite($this->zip_fd, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Close the file
@fclose($v_file_compressed);
// ----- Unlink the temporary file
@unlink($v_gzip_temp_name);
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privCalculateStoredFilename()
// Description :
// Based on file descriptor properties and global options, this method
// calculate the filename that will be stored in the archive.
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privCalculateStoredFilename(&$p_filedescr, &$p_options) {
$v_result = 1;
// ----- Working variables
$p_filename = $p_filedescr['filename'];
if (isset($p_options[PCLZIP_OPT_ADD_PATH])) {
$p_add_dir = $p_options[PCLZIP_OPT_ADD_PATH];
} else {
$p_add_dir = '';
}
if (isset($p_options[PCLZIP_OPT_REMOVE_PATH])) {
$p_remove_dir = $p_options[PCLZIP_OPT_REMOVE_PATH];
} else {
$p_remove_dir = '';
}
if (isset($p_options[PCLZIP_OPT_REMOVE_ALL_PATH])) {
$p_remove_all_dir = $p_options[PCLZIP_OPT_REMOVE_ALL_PATH];
} else {
$p_remove_all_dir = 0;
}
// ----- Look for full name change
if (isset($p_filedescr['new_full_name'])) {
// ----- Remove drive letter if any
$v_stored_filename = PclZipUtilTranslateWinPath($p_filedescr['new_full_name']);
}
// ----- Look for path and/or short name change
else {
// ----- Look for short name change
// Its when we cahnge just the filename but not the path
if (isset($p_filedescr['new_short_name'])) {
$v_path_info = pathinfo($p_filename);
$v_dir = '';
if ($v_path_info['dirname'] != '') {
$v_dir = $v_path_info['dirname'] . '/';
}
$v_stored_filename = $v_dir . $p_filedescr['new_short_name'];
} else {
// ----- Calculate the stored filename
$v_stored_filename = $p_filename;
}
// ----- Look for all path to remove
if ($p_remove_all_dir) {
$v_stored_filename = basename($p_filename);
}
// ----- Look for partial path remove
else if ($p_remove_dir != "") {
if (substr($p_remove_dir, -1) != '/')
$p_remove_dir .= "/";
if ((substr($p_filename, 0, 2) == "./") || (substr($p_remove_dir, 0, 2) == "./")) {
if ((substr($p_filename, 0, 2) == "./") && (substr($p_remove_dir, 0, 2) != "./")) {
$p_remove_dir = "./" . $p_remove_dir;
}
if ((substr($p_filename, 0, 2) != "./") && (substr($p_remove_dir, 0, 2) == "./")) {
$p_remove_dir = substr($p_remove_dir, 2);
}
}
$v_compare = PclZipUtilPathInclusion($p_remove_dir, $v_stored_filename);
if ($v_compare > 0) {
if ($v_compare == 2) {
$v_stored_filename = "";
} else {
$v_stored_filename = substr($v_stored_filename, strlen($p_remove_dir));
}
}
}
// ----- Remove drive letter if any
$v_stored_filename = PclZipUtilTranslateWinPath($v_stored_filename);
// ----- Look for path to add
if ($p_add_dir != "") {
if (substr($p_add_dir, -1) == "/")
$v_stored_filename = $p_add_dir . $v_stored_filename;
else
$v_stored_filename = $p_add_dir . "/" . $v_stored_filename;
}
}
// ----- Filename (reduce the path of stored name)
$v_stored_filename = PclZipUtilPathReduction($v_stored_filename);
$p_filedescr['stored_filename'] = $v_stored_filename;
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privWriteFileHeader()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privWriteFileHeader(&$p_header) {
$v_result = 1;
// ----- Store the offset position of the file
$p_header['offset'] = ftell($this->zip_fd);
// ----- Transform UNIX mtime to DOS format mdate/mtime
$v_date = getdate($p_header['mtime']);
$v_mtime = ($v_date['hours'] << 11) + ($v_date['minutes'] << 5) + $v_date['seconds'] / 2;
$v_mdate = (($v_date['year'] - 1980) << 9) + ($v_date['mon'] << 5) + $v_date['mday'];
// ----- Packed data
$v_binary_data = pack("VvvvvvVVVvv", 0x04034b50, $p_header['version_extracted'], $p_header['flag'], $p_header['compression'], $v_mtime, $v_mdate, $p_header['crc'], $p_header['compressed_size'], $p_header['size'], strlen($p_header['stored_filename']), $p_header['extra_len']);
// ----- Write the first 148 bytes of the header in the archive
fputs($this->zip_fd, $v_binary_data, 30);
// ----- Write the variable fields
if (strlen($p_header['stored_filename']) != 0) {
fputs($this->zip_fd, $p_header['stored_filename'], strlen($p_header['stored_filename']));
}
if ($p_header['extra_len'] != 0) {
fputs($this->zip_fd, $p_header['extra'], $p_header['extra_len']);
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privWriteCentralFileHeader()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privWriteCentralFileHeader(&$p_header) {
$v_result = 1;
// TBC
//for(reset($p_header); $key = key($p_header); next($p_header)) {
//}
// ----- Transform UNIX mtime to DOS format mdate/mtime
$v_date = getdate($p_header['mtime']);
$v_mtime = ($v_date['hours'] << 11) + ($v_date['minutes'] << 5) + $v_date['seconds'] / 2;
$v_mdate = (($v_date['year'] - 1980) << 9) + ($v_date['mon'] << 5) + $v_date['mday'];
// ----- Packed data
$v_binary_data = pack("VvvvvvvVVVvvvvvVV", 0x02014b50, $p_header['version'], $p_header['version_extracted'], $p_header['flag'], $p_header['compression'], $v_mtime, $v_mdate, $p_header['crc'], $p_header['compressed_size'], $p_header['size'], strlen($p_header['stored_filename']), $p_header['extra_len'], $p_header['comment_len'], $p_header['disk'], $p_header['internal'], $p_header['external'], $p_header['offset']);
// ----- Write the 42 bytes of the header in the zip file
fputs($this->zip_fd, $v_binary_data, 46);
// ----- Write the variable fields
if (strlen($p_header['stored_filename']) != 0) {
fputs($this->zip_fd, $p_header['stored_filename'], strlen($p_header['stored_filename']));
}
if ($p_header['extra_len'] != 0) {
fputs($this->zip_fd, $p_header['extra'], $p_header['extra_len']);
}
if ($p_header['comment_len'] != 0) {
fputs($this->zip_fd, $p_header['comment'], $p_header['comment_len']);
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privWriteCentralHeader()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privWriteCentralHeader($p_nb_entries, $p_size, $p_offset, $p_comment) {
$v_result = 1;
// ----- Packed data
$v_binary_data = pack("VvvvvVVv", 0x06054b50, 0, 0, $p_nb_entries, $p_nb_entries, $p_size, $p_offset, strlen($p_comment));
// ----- Write the 22 bytes of the header in the zip file
fputs($this->zip_fd, $v_binary_data, 22);
// ----- Write the variable fields
if (strlen($p_comment) != 0) {
fputs($this->zip_fd, $p_comment, strlen($p_comment));
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privList()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privList(&$p_list) {
$v_result = 1;
// ----- Magic quotes trick
$this->privDisableMagicQuotes();
// ----- Open the zip file
if (($this->zip_fd = @fopen($this->zipname, 'rb')) == 0) {
// ----- Magic quotes trick
$this->privSwapBackMagicQuotes();
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open archive '' . $this->zipname . '' in binary read mode');
// ----- Return
return PclZip::errorCode();
}
// ----- Read the central directory informations
$v_central_dir = array();
if (($v_result = $this->privReadEndCentralDir($v_central_dir)) != 1) {
$this->privSwapBackMagicQuotes();
return $v_result;
}
// ----- Go to beginning of Central Dir
@rewind($this->zip_fd);
if (@fseek($this->zip_fd, $v_central_dir['offset'])) {
$this->privSwapBackMagicQuotes();
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ARCHIVE_ZIP, 'Invalid archive size');
// ----- Return
return PclZip::errorCode();
}
// ----- Read each entry
for ($i = 0; $i < $v_central_dir['entries']; $i++) {
// ----- Read the file header
if (($v_result = $this->privReadCentralFileHeader($v_header)) != 1) {
$this->privSwapBackMagicQuotes();
return $v_result;
}
$v_header['index'] = $i;
// ----- Get the only interesting attributes
$this->privConvertHeader2FileInfo($v_header, $p_list[$i]);
unset($v_header);
}
// ----- Close the zip file
$this->privCloseFd();
// ----- Magic quotes trick
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privConvertHeader2FileInfo()
// Description :
// This function takes the file informations from the central directory
// entries and extract the interesting parameters that will be given back.
// The resulting file infos are set in the array $p_info
// $p_info['filename'] : Filename with full path. Given by user (add),
// extracted in the filesystem (extract).
// $p_info['stored_filename'] : Stored filename in the archive.
// $p_info['size'] = Size of the file.
// $p_info['compressed_size'] = Compressed size of the file.
// $p_info['mtime'] = Last modification date of the file.
// $p_info['comment'] = Comment associated with the file.
// $p_info['folder'] = true/false : indicates if the entry is a folder or not.
// $p_info['status'] = status of the action on the file.
// $p_info['crc'] = CRC of the file content.
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privConvertHeader2FileInfo($p_header, &$p_info) {
$v_result = 1;
// ----- Get the interesting attributes
$v_temp_path = PclZipUtilPathReduction($p_header['filename']);
$p_info['filename'] = $v_temp_path;
$v_temp_path = PclZipUtilPathReduction($p_header['stored_filename']);
$p_info['stored_filename'] = $v_temp_path;
$p_info['size'] = $p_header['size'];
$p_info['compressed_size'] = $p_header['compressed_size'];
$p_info['mtime'] = $p_header['mtime'];
$p_info['comment'] = $p_header['comment'];
$p_info['folder'] = (($p_header['external'] & 0x00000010) == 0x00000010);
$p_info['index'] = $p_header['index'];
$p_info['status'] = $p_header['status'];
$p_info['crc'] = $p_header['crc'];
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privExtractByRule()
// Description :
// Extract a file or directory depending of rules (by index, by name, ...)
// Parameters :
// $p_file_list : An array where will be placed the properties of each
// extracted file
// $p_path : Path to add while writing the extracted files
// $p_remove_path : Path to remove (from the file memorized path) while writing the
// extracted files. If the path does not match the file path,
// the file is extracted with its memorized path.
// $p_remove_path does not apply to 'list' mode.
// $p_path and $p_remove_path are commulative.
// Return Values :
// 1 on success,0 or less on error (see error code list)
// --------------------------------------------------------------------------------
function privExtractByRule(&$p_file_list, $p_path, $p_remove_path, $p_remove_all_path, &$p_options) {
$v_result = 1;
// ----- Magic quotes trick
$this->privDisableMagicQuotes();
// ----- Check the path
if (($p_path == "") || ( (substr($p_path, 0, 1) != "/") && (substr($p_path, 0, 3) != "../") && (substr($p_path, 1, 2) != ":/")))
$p_path = "./" . $p_path;
// ----- Reduce the path last (and duplicated) '/'
if (($p_path != "./") && ($p_path != "/")) {
// ----- Look for the path end '/'
while (substr($p_path, -1) == "/") {
$p_path = substr($p_path, 0, strlen($p_path) - 1);
}
}
// ----- Look for path to remove format (should end by /)
if (($p_remove_path != "") && (substr($p_remove_path, -1) != '/')) {
$p_remove_path .= '/';
}
$p_remove_path_size = strlen($p_remove_path);
// ----- Open the zip file
if (($v_result = $this->privOpenFd('rb')) != 1) {
$this->privSwapBackMagicQuotes();
return $v_result;
}
// ----- Read the central directory informations
$v_central_dir = array();
if (($v_result = $this->privReadEndCentralDir($v_central_dir)) != 1) {
// ----- Close the zip file
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result;
}
// ----- Start at beginning of Central Dir
$v_pos_entry = $v_central_dir['offset'];
// ----- Read each entry
$j_start = 0;
for ($i = 0, $v_nb_extracted = 0; $i < $v_central_dir['entries']; $i++) {
// ----- Read next Central dir entry
@rewind($this->zip_fd);
if (@fseek($this->zip_fd, $v_pos_entry)) {
// ----- Close the zip file
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ARCHIVE_ZIP, 'Invalid archive size');
// ----- Return
return PclZip::errorCode();
}
// ----- Read the file header
$v_header = array();
if (($v_result = $this->privReadCentralFileHeader($v_header)) != 1) {
// ----- Close the zip file
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result;
}
// ----- Store the index
$v_header['index'] = $i;
// ----- Store the file position
$v_pos_entry = ftell($this->zip_fd);
// ----- Look for the specific extract rules
$v_extract = false;
// ----- Look for extract by name rule
if ((isset($p_options[PCLZIP_OPT_BY_NAME])) && ($p_options[PCLZIP_OPT_BY_NAME] != 0)) {
// ----- Look if the filename is in the list
for ($j = 0; ($j < sizeof($p_options[PCLZIP_OPT_BY_NAME])) && (!$v_extract); $j++) {
// ----- Look for a directory
if (substr($p_options[PCLZIP_OPT_BY_NAME][$j], -1) == "/") {
// ----- Look if the directory is in the filename path
if ((strlen($v_header['stored_filename']) > strlen($p_options[PCLZIP_OPT_BY_NAME][$j])) && (substr($v_header['stored_filename'], 0, strlen($p_options[PCLZIP_OPT_BY_NAME][$j])) == $p_options[PCLZIP_OPT_BY_NAME][$j])) {
$v_extract = true;
}
}
// ----- Look for a filename
elseif ($v_header['stored_filename'] == $p_options[PCLZIP_OPT_BY_NAME][$j]) {
$v_extract = true;
}
}
}
// ----- Look for extract by ereg rule
// ereg() is deprecated with PHP 5.3
/*
else if ( (isset($p_options[PCLZIP_OPT_BY_EREG]))
&& ($p_options[PCLZIP_OPT_BY_EREG] != "")) {
if (ereg($p_options[PCLZIP_OPT_BY_EREG], $v_header['stored_filename'])) {
$v_extract = true;
}
}
*/
// ----- Look for extract by preg rule
else if ((isset($p_options[PCLZIP_OPT_BY_PREG])) && ($p_options[PCLZIP_OPT_BY_PREG] != "")) {
if (preg_match($p_options[PCLZIP_OPT_BY_PREG], $v_header['stored_filename'])) {
$v_extract = true;
}
}
// ----- Look for extract by index rule
else if ((isset($p_options[PCLZIP_OPT_BY_INDEX])) && ($p_options[PCLZIP_OPT_BY_INDEX] != 0)) {
// ----- Look if the index is in the list
for ($j = $j_start; ($j < sizeof($p_options[PCLZIP_OPT_BY_INDEX])) && (!$v_extract); $j++) {
if (($i >= $p_options[PCLZIP_OPT_BY_INDEX][$j]['start']) && ($i <= $p_options[PCLZIP_OPT_BY_INDEX][$j]['end'])) {
$v_extract = true;
}
if ($i >= $p_options[PCLZIP_OPT_BY_INDEX][$j]['end']) {
$j_start = $j + 1;
}
if ($p_options[PCLZIP_OPT_BY_INDEX][$j]['start'] > $i) {
break;
}
}
}
// ----- Look for no rule, which means extract all the archive
else {
$v_extract = true;
}
// ----- Check compression method
if (($v_extract) && ( ($v_header['compression'] != 8) && ($v_header['compression'] != 0))) {
$v_header['status'] = 'unsupported_compression';
// ----- Look for PCLZIP_OPT_STOP_ON_ERROR
if ((isset($p_options[PCLZIP_OPT_STOP_ON_ERROR])) && ($p_options[PCLZIP_OPT_STOP_ON_ERROR] === true)) {
$this->privSwapBackMagicQuotes();
PclZip::privErrorLog(PCLZIP_ERR_UNSUPPORTED_COMPRESSION, "Filename '" . $v_header['stored_filename'] . "' is "
. "compressed by an unsupported compression "
. "method (" . $v_header['compression'] . ") ");
return PclZip::errorCode();
}
}
// ----- Check encrypted files
if (($v_extract) && (($v_header['flag'] & 1) == 1)) {
$v_header['status'] = 'unsupported_encryption';
// ----- Look for PCLZIP_OPT_STOP_ON_ERROR
if ((isset($p_options[PCLZIP_OPT_STOP_ON_ERROR])) && ($p_options[PCLZIP_OPT_STOP_ON_ERROR] === true)) {
$this->privSwapBackMagicQuotes();
PclZip::privErrorLog(PCLZIP_ERR_UNSUPPORTED_ENCRYPTION, "Unsupported encryption for "
. " filename '" . $v_header['stored_filename']
. "'");
return PclZip::errorCode();
}
}
// ----- Look for real extraction
if (($v_extract) && ($v_header['status'] != 'ok')) {
$v_result = $this->privConvertHeader2FileInfo($v_header, $p_file_list[$v_nb_extracted++]);
if ($v_result != 1) {
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result;
}
$v_extract = false;
}
// ----- Look for real extraction
if ($v_extract) {
// ----- Go to the file position
@rewind($this->zip_fd);
if (@fseek($this->zip_fd, $v_header['offset'])) {
// ----- Close the zip file
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ARCHIVE_ZIP, 'Invalid archive size');
// ----- Return
return PclZip::errorCode();
}
// ----- Look for extraction as string
if ($p_options[PCLZIP_OPT_EXTRACT_AS_STRING]) {
$v_string = '';
// ----- Extracting the file
$v_result1 = $this->privExtractFileAsString($v_header, $v_string, $p_options);
if ($v_result1 < 1) {
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result1;
}
// ----- Get the only interesting attributes
if (($v_result = $this->privConvertHeader2FileInfo($v_header, $p_file_list[$v_nb_extracted])) != 1) {
// ----- Close the zip file
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result;
}
// ----- Set the file content
$p_file_list[$v_nb_extracted]['content'] = $v_string;
// ----- Next extracted file
$v_nb_extracted++;
// ----- Look for user callback abort
if ($v_result1 == 2) {
break;
}
}
// ----- Look for extraction in standard output
elseif ((isset($p_options[PCLZIP_OPT_EXTRACT_IN_OUTPUT])) && ($p_options[PCLZIP_OPT_EXTRACT_IN_OUTPUT])) {
// ----- Extracting the file in standard output
$v_result1 = $this->privExtractFileInOutput($v_header, $p_options);
if ($v_result1 < 1) {
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result1;
}
// ----- Get the only interesting attributes
if (($v_result = $this->privConvertHeader2FileInfo($v_header, $p_file_list[$v_nb_extracted++])) != 1) {
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result;
}
// ----- Look for user callback abort
if ($v_result1 == 2) {
break;
}
}
// ----- Look for normal extraction
else {
// ----- Extracting the file
$v_result1 = $this->privExtractFile($v_header, $p_path, $p_remove_path, $p_remove_all_path, $p_options);
if ($v_result1 < 1) {
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result1;
}
// ----- Get the only interesting attributes
if (($v_result = $this->privConvertHeader2FileInfo($v_header, $p_file_list[$v_nb_extracted++])) != 1) {
// ----- Close the zip file
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
return $v_result;
}
// ----- Look for user callback abort
if ($v_result1 == 2) {
break;
}
}
}
}
// ----- Close the zip file
$this->privCloseFd();
$this->privSwapBackMagicQuotes();
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privExtractFile()
// Description :
// Parameters :
// Return Values :
//
// 1 : ... ?
// PCLZIP_ERR_USER_ABORTED(2) : User ask for extraction stop in callback
// --------------------------------------------------------------------------------
function privExtractFile(&$p_entry, $p_path, $p_remove_path, $p_remove_all_path, &$p_options) {
$v_result = 1;
// ----- Read the file header
if (($v_result = $this->privReadFileHeader($v_header)) != 1) {
// ----- Return
return $v_result;
}
// ----- Check that the file header is coherent with $p_entry info
if ($this->privCheckFileHeaders($v_header, $p_entry) != 1) {
// TBC
}
// ----- Look for all path to remove
if ($p_remove_all_path == true) {
// ----- Look for folder entry that not need to be extracted
if (($p_entry['external'] & 0x00000010) == 0x00000010) {
$p_entry['status'] = "filtered";
return $v_result;
}
// ----- Get the basename of the path
$p_entry['filename'] = basename($p_entry['filename']);
}
// ----- Look for path to remove
else if ($p_remove_path != "") {
if (PclZipUtilPathInclusion($p_remove_path, $p_entry['filename']) == 2) {
// ----- Change the file status
$p_entry['status'] = "filtered";
// ----- Return
return $v_result;
}
$p_remove_path_size = strlen($p_remove_path);
if (substr($p_entry['filename'], 0, $p_remove_path_size) == $p_remove_path) {
// ----- Remove the path
$p_entry['filename'] = substr($p_entry['filename'], $p_remove_path_size);
}
}
// ----- Add the path
if ($p_path != '') {
$p_entry['filename'] = $p_path . "/" . $p_entry['filename'];
}
// ----- Check a base_dir_restriction
if (isset($p_options[PCLZIP_OPT_EXTRACT_DIR_RESTRICTION])) {
$v_inclusion = PclZipUtilPathInclusion($p_options[PCLZIP_OPT_EXTRACT_DIR_RESTRICTION], $p_entry['filename']);
if ($v_inclusion == 0) {
PclZip::privErrorLog(PCLZIP_ERR_DIRECTORY_RESTRICTION, "Filename '" . $p_entry['filename'] . "' is "
. "outside PCLZIP_OPT_EXTRACT_DIR_RESTRICTION");
return PclZip::errorCode();
}
}
// ----- Look for pre-extract callback
if (isset($p_options[PCLZIP_CB_PRE_EXTRACT])) {
// ----- Generate a local information
$v_local_header = array();
$this->privConvertHeader2FileInfo($p_entry, $v_local_header);
// ----- Call the callback
// Here I do not use call_user_func() because I need to send a reference to the
// header.
// eval('$v_result = '.$p_options[PCLZIP_CB_PRE_EXTRACT].'(PCLZIP_CB_PRE_EXTRACT, $v_local_header);');
$v_result = $p_options[PCLZIP_CB_PRE_EXTRACT](PCLZIP_CB_PRE_EXTRACT, $v_local_header);
if ($v_result == 0) {
// ----- Change the file status
$p_entry['status'] = "skipped";
$v_result = 1;
}
// ----- Look for abort result
if ($v_result == 2) {
// ----- This status is internal and will be changed in 'skipped'
$p_entry['status'] = "aborted";
$v_result = PCLZIP_ERR_USER_ABORTED;
}
// ----- Update the informations
// Only some fields can be modified
$p_entry['filename'] = $v_local_header['filename'];
}
// ----- Look if extraction should be done
if ($p_entry['status'] == 'ok') {
// ----- Look for specific actions while the file exist
if (file_exists($p_entry['filename'])) {
// ----- Look if file is a directory
if (is_dir($p_entry['filename'])) {
// ----- Change the file status
$p_entry['status'] = "already_a_directory";
// ----- Look for PCLZIP_OPT_STOP_ON_ERROR
// For historical reason first PclZip implementation does not stop
// when this kind of error occurs.
if ((isset($p_options[PCLZIP_OPT_STOP_ON_ERROR])) && ($p_options[PCLZIP_OPT_STOP_ON_ERROR] === true)) {
PclZip::privErrorLog(PCLZIP_ERR_ALREADY_A_DIRECTORY, "Filename '" . $p_entry['filename'] . "' is "
. "already used by an existing directory");
return PclZip::errorCode();
}
}
// ----- Look if file is write protected
else if (!is_writeable($p_entry['filename'])) {
// ----- Change the file status
$p_entry['status'] = "write_protected";
// ----- Look for PCLZIP_OPT_STOP_ON_ERROR
// For historical reason first PclZip implementation does not stop
// when this kind of error occurs.
if ((isset($p_options[PCLZIP_OPT_STOP_ON_ERROR])) && ($p_options[PCLZIP_OPT_STOP_ON_ERROR] === true)) {
PclZip::privErrorLog(PCLZIP_ERR_WRITE_OPEN_FAIL, "Filename '" . $p_entry['filename'] . "' exists "
. "and is write protected");
return PclZip::errorCode();
}
}
// ----- Look if the extracted file is older
else if (filemtime($p_entry['filename']) > $p_entry['mtime']) {
// ----- Change the file status
if ((isset($p_options[PCLZIP_OPT_REPLACE_NEWER])) && ($p_options[PCLZIP_OPT_REPLACE_NEWER] === true)) {
} else {
$p_entry['status'] = "newer_exist";
// ----- Look for PCLZIP_OPT_STOP_ON_ERROR
// For historical reason first PclZip implementation does not stop
// when this kind of error occurs.
if ((isset($p_options[PCLZIP_OPT_STOP_ON_ERROR])) && ($p_options[PCLZIP_OPT_STOP_ON_ERROR] === true)) {
PclZip::privErrorLog(PCLZIP_ERR_WRITE_OPEN_FAIL, "Newer version of '" . $p_entry['filename'] . "' exists "
. "and option PCLZIP_OPT_REPLACE_NEWER is not selected");
return PclZip::errorCode();
}
}
} else {
}
}
// ----- Check the directory availability and create it if necessary
else {
if ((($p_entry['external'] & 0x00000010) == 0x00000010) || (substr($p_entry['filename'], -1) == '/'))
$v_dir_to_check = $p_entry['filename'];
else if (!strstr($p_entry['filename'], "/"))
$v_dir_to_check = "";
else
$v_dir_to_check = dirname($p_entry['filename']);
if (($v_result = $this->privDirCheck($v_dir_to_check, (($p_entry['external'] & 0x00000010) == 0x00000010))) != 1) {
// ----- Change the file status
$p_entry['status'] = "path_creation_fail";
// ----- Return
//return $v_result;
$v_result = 1;
}
}
}
// ----- Look if extraction should be done
if ($p_entry['status'] == 'ok') {
// ----- Do the extraction (if not a folder)
if (!(($p_entry['external'] & 0x00000010) == 0x00000010)) {
// ----- Look for not compressed file
if ($p_entry['compression'] == 0) {
// ----- Opening destination file
if (($v_dest_file = @fopen($p_entry['filename'], 'wb')) == 0) {
// ----- Change the file status
$p_entry['status'] = "write_error";
// ----- Return
return $v_result;
}
// ----- Read the file by PCLZIP_READ_BLOCK_SIZE octets blocks
$v_size = $p_entry['compressed_size'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($this->zip_fd, $v_read_size);
/* Try to speed up the code
$v_binary_data = pack('a'.$v_read_size, $v_buffer);
@fwrite($v_dest_file, $v_binary_data, $v_read_size);
*/
@fwrite($v_dest_file, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Closing the destination file
fclose($v_dest_file);
// ----- Change the file mtime
touch($p_entry['filename'], $p_entry['mtime']);
} else {
// ----- TBC
// Need to be finished
if (($p_entry['flag'] & 1) == 1) {
PclZip::privErrorLog(PCLZIP_ERR_UNSUPPORTED_ENCRYPTION, 'File '' . $p_entry['filename'] . '' is encrypted. Encrypted files are not supported.');
return PclZip::errorCode();
}
// ----- Look for using temporary file to unzip
if ((!isset($p_options[PCLZIP_OPT_TEMP_FILE_OFF])) && (isset($p_options[PCLZIP_OPT_TEMP_FILE_ON]) || (isset($p_options[PCLZIP_OPT_TEMP_FILE_THRESHOLD]) && ($p_options[PCLZIP_OPT_TEMP_FILE_THRESHOLD] <= $p_entry['size'])) )) {
$v_result = $this->privExtractFileUsingTempFile($p_entry, $p_options);
if ($v_result < PCLZIP_ERR_NO_ERROR) {
return $v_result;
}
}
// ----- Look for extract in memory
else {
// ----- Read the compressed file in a buffer (one shot)
$v_buffer = @fread($this->zip_fd, $p_entry['compressed_size']);
// ----- Decompress the file
$v_file_content = @gzinflate($v_buffer);
unset($v_buffer);
if ($v_file_content === FALSE) {
// ----- Change the file status
// TBC
$p_entry['status'] = "error";
return $v_result;
}
// ----- Opening destination file
if (($v_dest_file = @fopen($p_entry['filename'], 'wb')) == 0) {
// ----- Change the file status
$p_entry['status'] = "write_error";
return $v_result;
}
// ----- Write the uncompressed data
@fwrite($v_dest_file, $v_file_content, $p_entry['size']);
unset($v_file_content);
// ----- Closing the destination file
@fclose($v_dest_file);
}
// ----- Change the file mtime
@touch($p_entry['filename'], $p_entry['mtime']);
}
// ----- Look for chmod option
if (isset($p_options[PCLZIP_OPT_SET_CHMOD])) {
// ----- Change the mode of the file
@chmod($p_entry['filename'], $p_options[PCLZIP_OPT_SET_CHMOD]);
}
}
}
// ----- Change abort status
if ($p_entry['status'] == "aborted") {
$p_entry['status'] = "skipped";
}
// ----- Look for post-extract callback
elseif (isset($p_options[PCLZIP_CB_POST_EXTRACT])) {
// ----- Generate a local information
$v_local_header = array();
$this->privConvertHeader2FileInfo($p_entry, $v_local_header);
// ----- Call the callback
// Here I do not use call_user_func() because I need to send a reference to the
// header.
// eval('$v_result = '.$p_options[PCLZIP_CB_POST_EXTRACT].'(PCLZIP_CB_POST_EXTRACT, $v_local_header);');
$v_result = $p_options[PCLZIP_CB_POST_EXTRACT](PCLZIP_CB_POST_EXTRACT, $v_local_header);
// ----- Look for abort result
if ($v_result == 2) {
$v_result = PCLZIP_ERR_USER_ABORTED;
}
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privExtractFileUsingTempFile()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privExtractFileUsingTempFile(&$p_entry, &$p_options) {
$v_result = 1;
// ----- Creates a temporary file
$v_gzip_temp_name = PCLZIP_TEMPORARY_DIR . uniqid('pclzip-') . '.gz';
if (($v_dest_file = @fopen($v_gzip_temp_name, "wb")) == 0) {
fclose($v_file);
PclZip::privErrorLog(PCLZIP_ERR_WRITE_OPEN_FAIL, 'Unable to open temporary file '' . $v_gzip_temp_name . '' in binary write mode');
return PclZip::errorCode();
}
// ----- Write gz file format header
$v_binary_data = pack('va1a1Va1a1', 0x8b1f, Chr($p_entry['compression']), Chr(0x00), time(), Chr(0x00), Chr(3));
@fwrite($v_dest_file, $v_binary_data, 10);
// ----- Read the file by PCLZIP_READ_BLOCK_SIZE octets blocks
$v_size = $p_entry['compressed_size'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($this->zip_fd, $v_read_size);
//$v_binary_data = pack('a'.$v_read_size, $v_buffer);
@fwrite($v_dest_file, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Write gz file format footer
$v_binary_data = pack('VV', $p_entry['crc'], $p_entry['size']);
@fwrite($v_dest_file, $v_binary_data, 8);
// ----- Close the temporary file
@fclose($v_dest_file);
// ----- Opening destination file
if (($v_dest_file = @fopen($p_entry['filename'], 'wb')) == 0) {
$p_entry['status'] = "write_error";
return $v_result;
}
// ----- Open the temporary gz file
if (($v_src_file = @gzopen($v_gzip_temp_name, 'rb')) == 0) {
@fclose($v_dest_file);
$p_entry['status'] = "read_error";
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open temporary file '' . $v_gzip_temp_name . '' in binary read mode');
return PclZip::errorCode();
}
// ----- Read the file by PCLZIP_READ_BLOCK_SIZE octets blocks
$v_size = $p_entry['size'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @gzread($v_src_file, $v_read_size);
//$v_binary_data = pack('a'.$v_read_size, $v_buffer);
@fwrite($v_dest_file, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
@fclose($v_dest_file);
@gzclose($v_src_file);
// ----- Delete the temporary file
@unlink($v_gzip_temp_name);
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privExtractFileInOutput()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privExtractFileInOutput(&$p_entry, &$p_options) {
$v_result = 1;
// ----- Read the file header
if (($v_result = $this->privReadFileHeader($v_header)) != 1) {
return $v_result;
}
// ----- Check that the file header is coherent with $p_entry info
if ($this->privCheckFileHeaders($v_header, $p_entry) != 1) {
// TBC
}
// ----- Look for pre-extract callback
if (isset($p_options[PCLZIP_CB_PRE_EXTRACT])) {
// ----- Generate a local information
$v_local_header = array();
$this->privConvertHeader2FileInfo($p_entry, $v_local_header);
// ----- Call the callback
// Here I do not use call_user_func() because I need to send a reference to the
// header.
// eval('$v_result = '.$p_options[PCLZIP_CB_PRE_EXTRACT].'(PCLZIP_CB_PRE_EXTRACT, $v_local_header);');
$v_result = $p_options[PCLZIP_CB_PRE_EXTRACT](PCLZIP_CB_PRE_EXTRACT, $v_local_header);
if ($v_result == 0) {
// ----- Change the file status
$p_entry['status'] = "skipped";
$v_result = 1;
}
// ----- Look for abort result
if ($v_result == 2) {
// ----- This status is internal and will be changed in 'skipped'
$p_entry['status'] = "aborted";
$v_result = PCLZIP_ERR_USER_ABORTED;
}
// ----- Update the informations
// Only some fields can be modified
$p_entry['filename'] = $v_local_header['filename'];
}
// ----- Trace
// ----- Look if extraction should be done
if ($p_entry['status'] == 'ok') {
// ----- Do the extraction (if not a folder)
if (!(($p_entry['external'] & 0x00000010) == 0x00000010)) {
// ----- Look for not compressed file
if ($p_entry['compressed_size'] == $p_entry['size']) {
// ----- Read the file in a buffer (one shot)
$v_buffer = @fread($this->zip_fd, $p_entry['compressed_size']);
// ----- Send the file to the output
echo $v_buffer;
unset($v_buffer);
} else {
// ----- Read the compressed file in a buffer (one shot)
$v_buffer = @fread($this->zip_fd, $p_entry['compressed_size']);
// ----- Decompress the file
$v_file_content = gzinflate($v_buffer);
unset($v_buffer);
// ----- Send the file to the output
echo $v_file_content;
unset($v_file_content);
}
}
}
// ----- Change abort status
if ($p_entry['status'] == "aborted") {
$p_entry['status'] = "skipped";
}
// ----- Look for post-extract callback
elseif (isset($p_options[PCLZIP_CB_POST_EXTRACT])) {
// ----- Generate a local information
$v_local_header = array();
$this->privConvertHeader2FileInfo($p_entry, $v_local_header);
// ----- Call the callback
// Here I do not use call_user_func() because I need to send a reference to the
// header.
// eval('$v_result = '.$p_options[PCLZIP_CB_POST_EXTRACT].'(PCLZIP_CB_POST_EXTRACT, $v_local_header);');
$v_result = $p_options[PCLZIP_CB_POST_EXTRACT](PCLZIP_CB_POST_EXTRACT, $v_local_header);
// ----- Look for abort result
if ($v_result == 2) {
$v_result = PCLZIP_ERR_USER_ABORTED;
}
}
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privExtractFileAsString()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privExtractFileAsString(&$p_entry, &$p_string, &$p_options) {
$v_result = 1;
// ----- Read the file header
$v_header = array();
if (($v_result = $this->privReadFileHeader($v_header)) != 1) {
// ----- Return
return $v_result;
}
// ----- Check that the file header is coherent with $p_entry info
if ($this->privCheckFileHeaders($v_header, $p_entry) != 1) {
// TBC
}
// ----- Look for pre-extract callback
if (isset($p_options[PCLZIP_CB_PRE_EXTRACT])) {
// ----- Generate a local information
$v_local_header = array();
$this->privConvertHeader2FileInfo($p_entry, $v_local_header);
// ----- Call the callback
// Here I do not use call_user_func() because I need to send a reference to the
// header.
// eval('$v_result = '.$p_options[PCLZIP_CB_PRE_EXTRACT].'(PCLZIP_CB_PRE_EXTRACT, $v_local_header);');
$v_result = $p_options[PCLZIP_CB_PRE_EXTRACT](PCLZIP_CB_PRE_EXTRACT, $v_local_header);
if ($v_result == 0) {
// ----- Change the file status
$p_entry['status'] = "skipped";
$v_result = 1;
}
// ----- Look for abort result
if ($v_result == 2) {
// ----- This status is internal and will be changed in 'skipped'
$p_entry['status'] = "aborted";
$v_result = PCLZIP_ERR_USER_ABORTED;
}
// ----- Update the informations
// Only some fields can be modified
$p_entry['filename'] = $v_local_header['filename'];
}
// ----- Look if extraction should be done
if ($p_entry['status'] == 'ok') {
// ----- Do the extraction (if not a folder)
if (!(($p_entry['external'] & 0x00000010) == 0x00000010)) {
// ----- Look for not compressed file
// if ($p_entry['compressed_size'] == $p_entry['size'])
if ($p_entry['compression'] == 0) {
// ----- Reading the file
$p_string = @fread($this->zip_fd, $p_entry['compressed_size']);
} else {
// ----- Reading the file
$v_data = @fread($this->zip_fd, $p_entry['compressed_size']);
// ----- Decompress the file
if (($p_string = @gzinflate($v_data)) === FALSE) {
// TBC
}
}
// ----- Trace
} else {
// TBC : error : can not extract a folder in a string
}
}
// ----- Change abort status
if ($p_entry['status'] == "aborted") {
$p_entry['status'] = "skipped";
}
// ----- Look for post-extract callback
elseif (isset($p_options[PCLZIP_CB_POST_EXTRACT])) {
// ----- Generate a local information
$v_local_header = array();
$this->privConvertHeader2FileInfo($p_entry, $v_local_header);
// ----- Swap the content to header
$v_local_header['content'] = $p_string;
$p_string = '';
// ----- Call the callback
// Here I do not use call_user_func() because I need to send a reference to the
// header.
// eval('$v_result = '.$p_options[PCLZIP_CB_POST_EXTRACT].'(PCLZIP_CB_POST_EXTRACT, $v_local_header);');
$v_result = $p_options[PCLZIP_CB_POST_EXTRACT](PCLZIP_CB_POST_EXTRACT, $v_local_header);
// ----- Swap back the content to header
$p_string = $v_local_header['content'];
unset($v_local_header['content']);
// ----- Look for abort result
if ($v_result == 2) {
$v_result = PCLZIP_ERR_USER_ABORTED;
}
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privReadFileHeader()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privReadFileHeader(&$p_header) {
$v_result = 1;
// ----- Read the 4 bytes signature
$v_binary_data = @fread($this->zip_fd, 4);
$v_data = unpack('Vid', $v_binary_data);
// ----- Check signature
if ($v_data['id'] != 0x04034b50) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Invalid archive structure');
// ----- Return
return PclZip::errorCode();
}
// ----- Read the first 42 bytes of the header
$v_binary_data = fread($this->zip_fd, 26);
// ----- Look for invalid block size
if (strlen($v_binary_data) != 26) {
$p_header['filename'] = "";
$p_header['status'] = "invalid_header";
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, "Invalid block size : " . strlen($v_binary_data));
// ----- Return
return PclZip::errorCode();
}
// ----- Extract the values
$v_data = unpack('vversion/vflag/vcompression/vmtime/vmdate/Vcrc/Vcompressed_size/Vsize/vfilename_len/vextra_len', $v_binary_data);
// ----- Get filename
$p_header['filename'] = fread($this->zip_fd, $v_data['filename_len']);
// ----- Get extra_fields
if ($v_data['extra_len'] != 0) {
$p_header['extra'] = fread($this->zip_fd, $v_data['extra_len']);
} else {
$p_header['extra'] = '';
}
// ----- Extract properties
$p_header['version_extracted'] = $v_data['version'];
$p_header['compression'] = $v_data['compression'];
$p_header['size'] = $v_data['size'];
$p_header['compressed_size'] = $v_data['compressed_size'];
$p_header['crc'] = $v_data['crc'];
$p_header['flag'] = $v_data['flag'];
$p_header['filename_len'] = $v_data['filename_len'];
// ----- Recuperate date in UNIX format
$p_header['mdate'] = $v_data['mdate'];
$p_header['mtime'] = $v_data['mtime'];
if ($p_header['mdate'] && $p_header['mtime']) {
// ----- Extract time
$v_hour = ($p_header['mtime'] & 0xF800) >> 11;
$v_minute = ($p_header['mtime'] & 0x07E0) >> 5;
$v_seconde = ($p_header['mtime'] & 0x001F) * 2;
// ----- Extract date
$v_year = (($p_header['mdate'] & 0xFE00) >> 9) + 1980;
$v_month = ($p_header['mdate'] & 0x01E0) >> 5;
$v_day = $p_header['mdate'] & 0x001F;
// ----- Get UNIX date format
$p_header['mtime'] = @mktime($v_hour, $v_minute, $v_seconde, $v_month, $v_day, $v_year);
} else {
$p_header['mtime'] = time();
}
// TBC
//for(reset($v_data); $key = key($v_data); next($v_data)) {
//}
// ----- Set the stored filename
$p_header['stored_filename'] = $p_header['filename'];
// ----- Set the status field
$p_header['status'] = "ok";
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privReadCentralFileHeader()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privReadCentralFileHeader(&$p_header) {
$v_result = 1;
// ----- Read the 4 bytes signature
$v_binary_data = @fread($this->zip_fd, 4);
$v_data = unpack('Vid', $v_binary_data);
// ----- Check signature
if ($v_data['id'] != 0x02014b50) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Invalid archive structure');
// ----- Return
return PclZip::errorCode();
}
// ----- Read the first 42 bytes of the header
$v_binary_data = fread($this->zip_fd, 42);
// ----- Look for invalid block size
if (strlen($v_binary_data) != 42) {
$p_header['filename'] = "";
$p_header['status'] = "invalid_header";
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, "Invalid block size : " . strlen($v_binary_data));
// ----- Return
return PclZip::errorCode();
}
// ----- Extract the values
$p_header = unpack('vversion/vversion_extracted/vflag/vcompression/vmtime/vmdate/Vcrc/Vcompressed_size/Vsize/vfilename_len/vextra_len/vcomment_len/vdisk/vinternal/Vexternal/Voffset', $v_binary_data);
// ----- Get filename
if ($p_header['filename_len'] != 0)
$p_header['filename'] = fread($this->zip_fd, $p_header['filename_len']);
else
$p_header['filename'] = '';
// ----- Get extra
if ($p_header['extra_len'] != 0)
$p_header['extra'] = fread($this->zip_fd, $p_header['extra_len']);
else
$p_header['extra'] = '';
// ----- Get comment
if ($p_header['comment_len'] != 0)
$p_header['comment'] = fread($this->zip_fd, $p_header['comment_len']);
else
$p_header['comment'] = '';
// ----- Extract properties
// ----- Recuperate date in UNIX format
//if ($p_header['mdate'] && $p_header['mtime'])
// TBC : bug : this was ignoring time with 0/0/0
if (1) {
// ----- Extract time
$v_hour = ($p_header['mtime'] & 0xF800) >> 11;
$v_minute = ($p_header['mtime'] & 0x07E0) >> 5;
$v_seconde = ($p_header['mtime'] & 0x001F) * 2;
// ----- Extract date
$v_year = (($p_header['mdate'] & 0xFE00) >> 9) + 1980;
$v_month = ($p_header['mdate'] & 0x01E0) >> 5;
$v_day = $p_header['mdate'] & 0x001F;
// ----- Get UNIX date format
$p_header['mtime'] = @mktime($v_hour, $v_minute, $v_seconde, $v_month, $v_day, $v_year);
} else {
$p_header['mtime'] = time();
}
// ----- Set the stored filename
$p_header['stored_filename'] = $p_header['filename'];
// ----- Set default status to ok
$p_header['status'] = 'ok';
// ----- Look if it is a directory
if (substr($p_header['filename'], -1) == '/') {
//$p_header['external'] = 0x41FF0010;
$p_header['external'] = 0x00000010;
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privCheckFileHeaders()
// Description :
// Parameters :
// Return Values :
// 1 on success,
// 0 on error;
// --------------------------------------------------------------------------------
function privCheckFileHeaders(&$p_local_header, &$p_central_header) {
$v_result = 1;
// ----- Check the static values
// TBC
if ($p_local_header['filename'] != $p_central_header['filename']) {
}
if ($p_local_header['version_extracted'] != $p_central_header['version_extracted']) {
}
if ($p_local_header['flag'] != $p_central_header['flag']) {
}
if ($p_local_header['compression'] != $p_central_header['compression']) {
}
if ($p_local_header['mtime'] != $p_central_header['mtime']) {
}
if ($p_local_header['filename_len'] != $p_central_header['filename_len']) {
}
// ----- Look for flag bit 3
if (($p_local_header['flag'] & 8) == 8) {
$p_local_header['size'] = $p_central_header['size'];
$p_local_header['compressed_size'] = $p_central_header['compressed_size'];
$p_local_header['crc'] = $p_central_header['crc'];
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privReadEndCentralDir()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privReadEndCentralDir(&$p_central_dir) {
$v_result = 1;
// ----- Go to the end of the zip file
$v_size = filesize($this->zipname);
@fseek($this->zip_fd, $v_size);
if (@ftell($this->zip_fd) != $v_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to go to the end of the archive '' . $this->zipname . ''');
// ----- Return
return PclZip::errorCode();
}
// ----- First try : look if this is an archive with no commentaries (most of the time)
// in this case the end of central dir is at 22 bytes of the file end
$v_found = 0;
if ($v_size > 26) {
@fseek($this->zip_fd, $v_size - 22);
if (($v_pos = @ftell($this->zip_fd)) != ($v_size - 22)) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to seek back to the middle of the archive '' . $this->zipname . ''');
// ----- Return
return PclZip::errorCode();
}
// ----- Read for bytes
$v_binary_data = @fread($this->zip_fd, 4);
$v_data = @unpack('Vid', $v_binary_data);
// ----- Check signature
if ($v_data['id'] == 0x06054b50) {
$v_found = 1;
}
$v_pos = ftell($this->zip_fd);
}
// ----- Go back to the maximum possible size of the Central Dir End Record
if (!$v_found) {
$v_maximum_size = 65557; // 0xFFFF + 22;
if ($v_maximum_size > $v_size)
$v_maximum_size = $v_size;
@fseek($this->zip_fd, $v_size - $v_maximum_size);
if (@ftell($this->zip_fd) != ($v_size - $v_maximum_size)) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'Unable to seek back to the middle of the archive '' . $this->zipname . ''');
// ----- Return
return PclZip::errorCode();
}
// ----- Read byte per byte in order to find the signature
$v_pos = ftell($this->zip_fd);
$v_bytes = 0x00000000;
while ($v_pos < $v_size) {
// ----- Read a byte
$v_byte = @fread($this->zip_fd, 1);
// ----- Add the byte
//$v_bytes = ($v_bytes << 8) | Ord($v_byte);
// Note we mask the old value down such that once shifted we can never end up with more than a 32bit number
// Otherwise on systems where we have 64bit integers the check below for the magic number will fail.
$v_bytes = ( ($v_bytes & 0xFFFFFF) << 8) | Ord($v_byte);
// ----- Compare the bytes
if ($v_bytes == 0x504b0506) {
$v_pos++;
break;
}
$v_pos++;
}
// ----- Look if not found end of central dir
if ($v_pos == $v_size) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, "Unable to find End of Central Dir Record signature");
// ----- Return
return PclZip::errorCode();
}
}
// ----- Read the first 18 bytes of the header
$v_binary_data = fread($this->zip_fd, 18);
// ----- Look for invalid block size
if (strlen($v_binary_data) != 18) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, "Invalid End of Central Dir Record size : " . strlen($v_binary_data));
// ----- Return
return PclZip::errorCode();
}
// ----- Extract the values
$v_data = unpack('vdisk/vdisk_start/vdisk_entries/ventries/Vsize/Voffset/vcomment_size', $v_binary_data);
// ----- Check the global size
if (($v_pos + $v_data['comment_size'] + 18) != $v_size) {
// ----- Removed in release 2.2 see readme file
// The check of the file size is a little too strict.
// Some bugs where found when a zip is encrypted/decrypted with 'crypt'.
// While decrypted, zip has training 0 bytes
if (0) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_BAD_FORMAT, 'The central dir is not at the end of the archive.'
. ' Some trailing bytes exists after the archive.');
// ----- Return
return PclZip::errorCode();
}
}
// ----- Get comment
if ($v_data['comment_size'] != 0) {
$p_central_dir['comment'] = fread($this->zip_fd, $v_data['comment_size']);
} else
$p_central_dir['comment'] = '';
$p_central_dir['entries'] = $v_data['entries'];
$p_central_dir['disk_entries'] = $v_data['disk_entries'];
$p_central_dir['offset'] = $v_data['offset'];
$p_central_dir['size'] = $v_data['size'];
$p_central_dir['disk'] = $v_data['disk'];
$p_central_dir['disk_start'] = $v_data['disk_start'];
// TBC
//for(reset($p_central_dir); $key = key($p_central_dir); next($p_central_dir)) {
//}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privDeleteByRule()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privDeleteByRule(&$p_result_list, &$p_options) {
$v_result = 1;
$v_list_detail = array();
// ----- Open the zip file
if (($v_result = $this->privOpenFd('rb')) != 1) {
// ----- Return
return $v_result;
}
// ----- Read the central directory informations
$v_central_dir = array();
if (($v_result = $this->privReadEndCentralDir($v_central_dir)) != 1) {
$this->privCloseFd();
return $v_result;
}
// ----- Go to beginning of File
@rewind($this->zip_fd);
// ----- Scan all the files
// ----- Start at beginning of Central Dir
$v_pos_entry = $v_central_dir['offset'];
@rewind($this->zip_fd);
if (@fseek($this->zip_fd, $v_pos_entry)) {
// ----- Close the zip file
$this->privCloseFd();
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ARCHIVE_ZIP, 'Invalid archive size');
// ----- Return
return PclZip::errorCode();
}
// ----- Read each entry
$v_header_list = array();
$j_start = 0;
for ($i = 0, $v_nb_extracted = 0; $i < $v_central_dir['entries']; $i++) {
// ----- Read the file header
$v_header_list[$v_nb_extracted] = array();
if (($v_result = $this->privReadCentralFileHeader($v_header_list[$v_nb_extracted])) != 1) {
// ----- Close the zip file
$this->privCloseFd();
return $v_result;
}
// ----- Store the index
$v_header_list[$v_nb_extracted]['index'] = $i;
// ----- Look for the specific extract rules
$v_found = false;
// ----- Look for extract by name rule
if ((isset($p_options[PCLZIP_OPT_BY_NAME])) && ($p_options[PCLZIP_OPT_BY_NAME] != 0)) {
// ----- Look if the filename is in the list
for ($j = 0; ($j < sizeof($p_options[PCLZIP_OPT_BY_NAME])) && (!$v_found); $j++) {
// ----- Look for a directory
if (substr($p_options[PCLZIP_OPT_BY_NAME][$j], -1) == "/") {
// ----- Look if the directory is in the filename path
if ((strlen($v_header_list[$v_nb_extracted]['stored_filename']) > strlen($p_options[PCLZIP_OPT_BY_NAME][$j])) && (substr($v_header_list[$v_nb_extracted]['stored_filename'], 0, strlen($p_options[PCLZIP_OPT_BY_NAME][$j])) == $p_options[PCLZIP_OPT_BY_NAME][$j])) {
$v_found = true;
} elseif ((($v_header_list[$v_nb_extracted]['external'] & 0x00000010) == 0x00000010) /* Indicates a folder */ && ($v_header_list[$v_nb_extracted]['stored_filename'] . '/' == $p_options[PCLZIP_OPT_BY_NAME][$j])) {
$v_found = true;
}
}
// ----- Look for a filename
elseif ($v_header_list[$v_nb_extracted]['stored_filename'] == $p_options[PCLZIP_OPT_BY_NAME][$j]) {
$v_found = true;
}
}
}
// ----- Look for extract by ereg rule
// ereg() is deprecated with PHP 5.3
/*
else if ( (isset($p_options[PCLZIP_OPT_BY_EREG]))
&& ($p_options[PCLZIP_OPT_BY_EREG] != "")) {
if (ereg($p_options[PCLZIP_OPT_BY_EREG], $v_header_list[$v_nb_extracted]['stored_filename'])) {
$v_found = true;
}
}
*/
// ----- Look for extract by preg rule
else if ((isset($p_options[PCLZIP_OPT_BY_PREG])) && ($p_options[PCLZIP_OPT_BY_PREG] != "")) {
if (preg_match($p_options[PCLZIP_OPT_BY_PREG], $v_header_list[$v_nb_extracted]['stored_filename'])) {
$v_found = true;
}
}
// ----- Look for extract by index rule
else if ((isset($p_options[PCLZIP_OPT_BY_INDEX])) && ($p_options[PCLZIP_OPT_BY_INDEX] != 0)) {
// ----- Look if the index is in the list
for ($j = $j_start; ($j < sizeof($p_options[PCLZIP_OPT_BY_INDEX])) && (!$v_found); $j++) {
if (($i >= $p_options[PCLZIP_OPT_BY_INDEX][$j]['start']) && ($i <= $p_options[PCLZIP_OPT_BY_INDEX][$j]['end'])) {
$v_found = true;
}
if ($i >= $p_options[PCLZIP_OPT_BY_INDEX][$j]['end']) {
$j_start = $j + 1;
}
if ($p_options[PCLZIP_OPT_BY_INDEX][$j]['start'] > $i) {
break;
}
}
} else {
$v_found = true;
}
// ----- Look for deletion
if ($v_found) {
unset($v_header_list[$v_nb_extracted]);
} else {
$v_nb_extracted++;
}
}
// ----- Look if something need to be deleted
if ($v_nb_extracted > 0) {
// ----- Creates a temporay file
$v_zip_temp_name = PCLZIP_TEMPORARY_DIR . uniqid('pclzip-') . '.tmp';
// ----- Creates a temporary zip archive
$v_temp_zip = new PclZip($v_zip_temp_name);
// ----- Open the temporary zip file in write mode
if (($v_result = $v_temp_zip->privOpenFd('wb')) != 1) {
$this->privCloseFd();
// ----- Return
return $v_result;
}
// ----- Look which file need to be kept
for ($i = 0; $i < sizeof($v_header_list); $i++) {
// ----- Calculate the position of the header
@rewind($this->zip_fd);
if (@fseek($this->zip_fd, $v_header_list[$i]['offset'])) {
// ----- Close the zip file
$this->privCloseFd();
$v_temp_zip->privCloseFd();
@unlink($v_zip_temp_name);
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_INVALID_ARCHIVE_ZIP, 'Invalid archive size');
// ----- Return
return PclZip::errorCode();
}
// ----- Read the file header
$v_local_header = array();
if (($v_result = $this->privReadFileHeader($v_local_header)) != 1) {
// ----- Close the zip file
$this->privCloseFd();
$v_temp_zip->privCloseFd();
@unlink($v_zip_temp_name);
// ----- Return
return $v_result;
}
// ----- Check that local file header is same as central file header
if ($this->privCheckFileHeaders($v_local_header, $v_header_list[$i]) != 1) {
// TBC
}
unset($v_local_header);
// ----- Write the file header
if (($v_result = $v_temp_zip->privWriteFileHeader($v_header_list[$i])) != 1) {
// ----- Close the zip file
$this->privCloseFd();
$v_temp_zip->privCloseFd();
@unlink($v_zip_temp_name);
// ----- Return
return $v_result;
}
// ----- Read/write the data block
if (($v_result = PclZipUtilCopyBlock($this->zip_fd, $v_temp_zip->zip_fd, $v_header_list[$i]['compressed_size'])) != 1) {
// ----- Close the zip file
$this->privCloseFd();
$v_temp_zip->privCloseFd();
@unlink($v_zip_temp_name);
// ----- Return
return $v_result;
}
}
// ----- Store the offset of the central dir
$v_offset = @ftell($v_temp_zip->zip_fd);
// ----- Re-Create the Central Dir files header
for ($i = 0; $i < sizeof($v_header_list); $i++) {
// ----- Create the file header
if (($v_result = $v_temp_zip->privWriteCentralFileHeader($v_header_list[$i])) != 1) {
$v_temp_zip->privCloseFd();
$this->privCloseFd();
@unlink($v_zip_temp_name);
// ----- Return
return $v_result;
}
// ----- Transform the header to a 'usable' info
$v_temp_zip->privConvertHeader2FileInfo($v_header_list[$i], $p_result_list[$i]);
}
// ----- Zip file comment
$v_comment = '';
if (isset($p_options[PCLZIP_OPT_COMMENT])) {
$v_comment = $p_options[PCLZIP_OPT_COMMENT];
}
// ----- Calculate the size of the central header
$v_size = @ftell($v_temp_zip->zip_fd) - $v_offset;
// ----- Create the central dir footer
if (($v_result = $v_temp_zip->privWriteCentralHeader(sizeof($v_header_list), $v_size, $v_offset, $v_comment)) != 1) {
// ----- Reset the file list
unset($v_header_list);
$v_temp_zip->privCloseFd();
$this->privCloseFd();
@unlink($v_zip_temp_name);
// ----- Return
return $v_result;
}
// ----- Close
$v_temp_zip->privCloseFd();
$this->privCloseFd();
// ----- Delete the zip file
// TBC : I should test the result ...
@unlink($this->zipname);
// ----- Rename the temporary file
// TBC : I should test the result ...
//@rename($v_zip_temp_name, $this->zipname);
PclZipUtilRename($v_zip_temp_name, $this->zipname);
// ----- Destroy the temporary archive
unset($v_temp_zip);
}
// ----- Remove every files : reset the file
else if ($v_central_dir['entries'] != 0) {
$this->privCloseFd();
if (($v_result = $this->privOpenFd('wb')) != 1) {
return $v_result;
}
if (($v_result = $this->privWriteCentralHeader(0, 0, 0, '')) != 1) {
return $v_result;
}
$this->privCloseFd();
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privDirCheck()
// Description :
// Check if a directory exists, if not it creates it and all the parents directory
// which may be useful.
// Parameters :
// $p_dir : Directory path to check.
// Return Values :
// 1 : OK
// -1 : Unable to create directory
// --------------------------------------------------------------------------------
function privDirCheck($p_dir, $p_is_dir = false) {
$v_result = 1;
// ----- Remove the final '/'
if (($p_is_dir) && (substr($p_dir, -1) == '/')) {
$p_dir = substr($p_dir, 0, strlen($p_dir) - 1);
}
// ----- Check the directory availability
if ((is_dir($p_dir)) || ($p_dir == "")) {
return 1;
}
// ----- Extract parent directory
$p_parent_dir = dirname($p_dir);
// ----- Just a check
if ($p_parent_dir != $p_dir) {
// ----- Look for parent directory
if ($p_parent_dir != "") {
if (($v_result = $this->privDirCheck($p_parent_dir)) != 1) {
return $v_result;
}
}
}
// ----- Create the directory
if (!@mkdir($p_dir, 0777)) {
// ----- Error log
PclZip::privErrorLog(PCLZIP_ERR_DIR_CREATE_FAIL, "Unable to create directory '$p_dir'");
// ----- Return
return PclZip::errorCode();
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privMerge()
// Description :
// If $p_archive_to_add does not exist, the function exit with a success result.
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privMerge(&$p_archive_to_add) {
$v_result = 1;
// ----- Look if the archive_to_add exists
if (!is_file($p_archive_to_add->zipname)) {
// ----- Nothing to merge, so merge is a success
$v_result = 1;
// ----- Return
return $v_result;
}
// ----- Look if the archive exists
if (!is_file($this->zipname)) {
// ----- Do a duplicate
$v_result = $this->privDuplicate($p_archive_to_add->zipname);
// ----- Return
return $v_result;
}
// ----- Open the zip file
if (($v_result = $this->privOpenFd('rb')) != 1) {
// ----- Return
return $v_result;
}
// ----- Read the central directory informations
$v_central_dir = array();
if (($v_result = $this->privReadEndCentralDir($v_central_dir)) != 1) {
$this->privCloseFd();
return $v_result;
}
// ----- Go to beginning of File
@rewind($this->zip_fd);
// ----- Open the archive_to_add file
if (($v_result = $p_archive_to_add->privOpenFd('rb')) != 1) {
$this->privCloseFd();
// ----- Return
return $v_result;
}
// ----- Read the central directory informations
$v_central_dir_to_add = array();
if (($v_result = $p_archive_to_add->privReadEndCentralDir($v_central_dir_to_add)) != 1) {
$this->privCloseFd();
$p_archive_to_add->privCloseFd();
return $v_result;
}
// ----- Go to beginning of File
@rewind($p_archive_to_add->zip_fd);
// ----- Creates a temporay file
$v_zip_temp_name = PCLZIP_TEMPORARY_DIR . uniqid('pclzip-') . '.tmp';
// ----- Open the temporary file in write mode
if (($v_zip_temp_fd = @fopen($v_zip_temp_name, 'wb')) == 0) {
$this->privCloseFd();
$p_archive_to_add->privCloseFd();
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open temporary file '' . $v_zip_temp_name . '' in binary write mode');
// ----- Return
return PclZip::errorCode();
}
// ----- Copy the files from the archive to the temporary file
// TBC : Here I should better append the file and go back to erase the central dir
$v_size = $v_central_dir['offset'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = fread($this->zip_fd, $v_read_size);
@fwrite($v_zip_temp_fd, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Copy the files from the archive_to_add into the temporary file
$v_size = $v_central_dir_to_add['offset'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = fread($p_archive_to_add->zip_fd, $v_read_size);
@fwrite($v_zip_temp_fd, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Store the offset of the central dir
$v_offset = @ftell($v_zip_temp_fd);
// ----- Copy the block of file headers from the old archive
$v_size = $v_central_dir['size'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($this->zip_fd, $v_read_size);
@fwrite($v_zip_temp_fd, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Copy the block of file headers from the archive_to_add
$v_size = $v_central_dir_to_add['size'];
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($p_archive_to_add->zip_fd, $v_read_size);
@fwrite($v_zip_temp_fd, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Merge the file comments
$v_comment = $v_central_dir['comment'] . ' ' . $v_central_dir_to_add['comment'];
// ----- Calculate the size of the (new) central header
$v_size = @ftell($v_zip_temp_fd) - $v_offset;
// ----- Swap the file descriptor
// Here is a trick : I swap the temporary fd with the zip fd, in order to use
// the following methods on the temporary fil and not the real archive fd
$v_swap = $this->zip_fd;
$this->zip_fd = $v_zip_temp_fd;
$v_zip_temp_fd = $v_swap;
// ----- Create the central dir footer
if (($v_result = $this->privWriteCentralHeader($v_central_dir['entries'] + $v_central_dir_to_add['entries'], $v_size, $v_offset, $v_comment)) != 1) {
$this->privCloseFd();
$p_archive_to_add->privCloseFd();
@fclose($v_zip_temp_fd);
$this->zip_fd = null;
// ----- Reset the file list
unset($v_header_list);
// ----- Return
return $v_result;
}
// ----- Swap back the file descriptor
$v_swap = $this->zip_fd;
$this->zip_fd = $v_zip_temp_fd;
$v_zip_temp_fd = $v_swap;
// ----- Close
$this->privCloseFd();
$p_archive_to_add->privCloseFd();
// ----- Close the temporary file
@fclose($v_zip_temp_fd);
// ----- Delete the zip file
// TBC : I should test the result ...
@unlink($this->zipname);
// ----- Rename the temporary file
// TBC : I should test the result ...
//@rename($v_zip_temp_name, $this->zipname);
PclZipUtilRename($v_zip_temp_name, $this->zipname);
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privDuplicate()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privDuplicate($p_archive_filename) {
$v_result = 1;
// ----- Look if the $p_archive_filename exists
if (!is_file($p_archive_filename)) {
// ----- Nothing to duplicate, so duplicate is a success.
$v_result = 1;
// ----- Return
return $v_result;
}
// ----- Open the zip file
if (($v_result = $this->privOpenFd('wb')) != 1) {
// ----- Return
return $v_result;
}
// ----- Open the temporary file in write mode
if (($v_zip_temp_fd = @fopen($p_archive_filename, 'rb')) == 0) {
$this->privCloseFd();
PclZip::privErrorLog(PCLZIP_ERR_READ_OPEN_FAIL, 'Unable to open archive file '' . $p_archive_filename . '' in binary write mode');
// ----- Return
return PclZip::errorCode();
}
// ----- Copy the files from the archive to the temporary file
// TBC : Here I should better append the file and go back to erase the central dir
$v_size = filesize($p_archive_filename);
while ($v_size != 0) {
$v_read_size = ($v_size < PCLZIP_READ_BLOCK_SIZE ? $v_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = fread($v_zip_temp_fd, $v_read_size);
@fwrite($this->zip_fd, $v_buffer, $v_read_size);
$v_size -= $v_read_size;
}
// ----- Close
$this->privCloseFd();
// ----- Close the temporary file
@fclose($v_zip_temp_fd);
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privErrorLog()
// Description :
// Parameters :
// --------------------------------------------------------------------------------
function privErrorLog($p_error_code = 0, $p_error_string = '') {
if (PCLZIP_ERROR_EXTERNAL == 1) {
PclError($p_error_code, $p_error_string);
} else {
$this->error_code = $p_error_code;
$this->error_string = $p_error_string;
}
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privErrorReset()
// Description :
// Parameters :
// --------------------------------------------------------------------------------
function privErrorReset() {
if (PCLZIP_ERROR_EXTERNAL == 1) {
PclErrorReset();
} else {
$this->error_code = 0;
$this->error_string = '';
}
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privDisableMagicQuotes()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privDisableMagicQuotes() {
$v_result = 1;
// ----- Look if function exists
if ((!function_exists("get_magic_quotes_runtime")) || (!function_exists("set_magic_quotes_runtime"))) {
return $v_result;
}
// ----- Look if already done
if ($this->magic_quotes_status != -1) {
return $v_result;
}
// ----- Get and memorize the magic_quote value
$this->magic_quotes_status = @get_magic_quotes_runtime();
// ----- Disable magic_quotes
if ($this->magic_quotes_status == 1) {
@set_magic_quotes_runtime(0);
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : privSwapBackMagicQuotes()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function privSwapBackMagicQuotes() {
$v_result = 1;
// ----- Look if function exists
if ((!function_exists("get_magic_quotes_runtime")) || (!function_exists("set_magic_quotes_runtime"))) {
return $v_result;
}
// ----- Look if something to do
if ($this->magic_quotes_status != -1) {
return $v_result;
}
// ----- Swap back magic_quotes
if ($this->magic_quotes_status == 1) {
@set_magic_quotes_runtime($this->magic_quotes_status);
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
}
// End of class
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : PclZipUtilPathReduction()
// Description :
// Parameters :
// Return Values :
// --------------------------------------------------------------------------------
function PclZipUtilPathReduction($p_dir) {
$v_result = "";
// ----- Look for not empty path
if ($p_dir != "") {
// ----- Explode path by directory names
$v_list = explode("/", $p_dir);
// ----- Study directories from last to first
$v_skip = 0;
for ($i = sizeof($v_list) - 1; $i >= 0; $i--) {
// ----- Look for current path
if ($v_list[$i] == ".") {
// ----- Ignore this directory
// Should be the first $i=0, but no check is done
} else if ($v_list[$i] == "..") {
$v_skip++;
} else if ($v_list[$i] == "") {
// ----- First '/' i.e. root slash
if ($i == 0) {
$v_result = "/" . $v_result;
if ($v_skip > 0) {
// ----- It is an invalid path, so the path is not modified
// TBC
$v_result = $p_dir;
$v_skip = 0;
}
}
// ----- Last '/' i.e. indicates a directory
else if ($i == (sizeof($v_list) - 1)) {
$v_result = $v_list[$i];
}
// ----- Double '/' inside the path
else {
// ----- Ignore only the double '//' in path,
// but not the first and last '/'
}
} else {
// ----- Look for item to skip
if ($v_skip > 0) {
$v_skip--;
} else {
$v_result = $v_list[$i] . ($i != (sizeof($v_list) - 1) ? "/" . $v_result : "");
}
}
}
// ----- Look for skip
if ($v_skip > 0) {
while ($v_skip > 0) {
$v_result = '../' . $v_result;
$v_skip--;
}
}
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : PclZipUtilPathInclusion()
// Description :
// This function indicates if the path $p_path is under the $p_dir tree. Or,
// said in an other way, if the file or sub-dir $p_path is inside the dir
// $p_dir.
// The function indicates also if the path is exactly the same as the dir.
// This function supports path with duplicated '/' like '//', but does not
// support '.' or '..' statements.
// Parameters :
// Return Values :
// 0 if $p_path is not inside directory $p_dir
// 1 if $p_path is inside directory $p_dir
// 2 if $p_path is exactly the same as $p_dir
// --------------------------------------------------------------------------------
function PclZipUtilPathInclusion($p_dir, $p_path) {
$v_result = 1;
// ----- Look for path beginning by ./
if (($p_dir == '.') || ((strlen($p_dir) >= 2) && (substr($p_dir, 0, 2) == './'))) {
$p_dir = PclZipUtilTranslateWinPath(getcwd(), FALSE) . '/' . substr($p_dir, 1);
}
if (($p_path == '.') || ((strlen($p_path) >= 2) && (substr($p_path, 0, 2) == './'))) {
$p_path = PclZipUtilTranslateWinPath(getcwd(), FALSE) . '/' . substr($p_path, 1);
}
// ----- Explode dir and path by directory separator
$v_list_dir = explode("/", $p_dir);
$v_list_dir_size = sizeof($v_list_dir);
$v_list_path = explode("/", $p_path);
$v_list_path_size = sizeof($v_list_path);
// ----- Study directories paths
$i = 0;
$j = 0;
while (($i < $v_list_dir_size) && ($j < $v_list_path_size) && ($v_result)) {
// ----- Look for empty dir (path reduction)
if ($v_list_dir[$i] == '') {
$i++;
continue;
}
if ($v_list_path[$j] == '') {
$j++;
continue;
}
// ----- Compare the items
if (($v_list_dir[$i] != $v_list_path[$j]) && ($v_list_dir[$i] != '') && ( $v_list_path[$j] != '')) {
$v_result = 0;
}
// ----- Next items
$i++;
$j++;
}
// ----- Look if everything seems to be the same
if ($v_result) {
// ----- Skip all the empty items
while (($j < $v_list_path_size) && ($v_list_path[$j] == ''))
$j++;
while (($i < $v_list_dir_size) && ($v_list_dir[$i] == ''))
$i++;
if (($i >= $v_list_dir_size) && ($j >= $v_list_path_size)) {
// ----- There are exactly the same
$v_result = 2;
} else if ($i < $v_list_dir_size) {
// ----- The path is shorter than the dir
$v_result = 0;
}
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : PclZipUtilCopyBlock()
// Description :
// Parameters :
// $p_mode : read/write compression mode
// 0 : src & dest normal
// 1 : src gzip, dest normal
// 2 : src normal, dest gzip
// 3 : src & dest gzip
// Return Values :
// --------------------------------------------------------------------------------
function PclZipUtilCopyBlock($p_src, $p_dest, $p_size, $p_mode = 0) {
$v_result = 1;
if ($p_mode == 0) {
while ($p_size != 0) {
$v_read_size = ($p_size < PCLZIP_READ_BLOCK_SIZE ? $p_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($p_src, $v_read_size);
@fwrite($p_dest, $v_buffer, $v_read_size);
$p_size -= $v_read_size;
}
} else if ($p_mode == 1) {
while ($p_size != 0) {
$v_read_size = ($p_size < PCLZIP_READ_BLOCK_SIZE ? $p_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @gzread($p_src, $v_read_size);
@fwrite($p_dest, $v_buffer, $v_read_size);
$p_size -= $v_read_size;
}
} else if ($p_mode == 2) {
while ($p_size != 0) {
$v_read_size = ($p_size < PCLZIP_READ_BLOCK_SIZE ? $p_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @fread($p_src, $v_read_size);
@gzwrite($p_dest, $v_buffer, $v_read_size);
$p_size -= $v_read_size;
}
} else if ($p_mode == 3) {
while ($p_size != 0) {
$v_read_size = ($p_size < PCLZIP_READ_BLOCK_SIZE ? $p_size : PCLZIP_READ_BLOCK_SIZE);
$v_buffer = @gzread($p_src, $v_read_size);
@gzwrite($p_dest, $v_buffer, $v_read_size);
$p_size -= $v_read_size;
}
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : PclZipUtilRename()
// Description :
// This function tries to do a simple rename() function. If it fails, it
// tries to copy the $p_src file in a new $p_dest file and then unlink the
// first one.
// Parameters :
// $p_src : Old filename
// $p_dest : New filename
// Return Values :
// 1 on success, 0 on failure.
// --------------------------------------------------------------------------------
function PclZipUtilRename($p_src, $p_dest) {
$v_result = 1;
// ----- Try to rename the files
if (!@rename($p_src, $p_dest)) {
// ----- Try to copy & unlink the src
if (!@copy($p_src, $p_dest)) {
$v_result = 0;
} else if (!@unlink($p_src)) {
$v_result = 0;
}
}
// ----- Return
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : PclZipUtilOptionText()
// Description :
// Translate option value in text. Mainly for debug purpose.
// Parameters :
// $p_option : the option value.
// Return Values :
// The option text value.
// --------------------------------------------------------------------------------
function PclZipUtilOptionText($p_option) {
$v_list = get_defined_constants();
for (reset($v_list); $v_key = key($v_list); next($v_list)) {
$v_prefix = substr($v_key, 0, 10);
if (( ($v_prefix == 'PCLZIP_OPT') || ($v_prefix == 'PCLZIP_CB_') || ($v_prefix == 'PCLZIP_ATT')) && ($v_list[$v_key] == $p_option)) {
return $v_key;
}
}
$v_result = 'Unknown';
return $v_result;
}
// --------------------------------------------------------------------------------
// --------------------------------------------------------------------------------
// Function : PclZipUtilTranslateWinPath()
// Description :
// Translate windows path by replacing '' by '/' and optionally removing
// drive letter.
// Parameters :
// $p_path : path to translate.
// $p_remove_disk_letter : true | false
// Return Values :
// The path translated.
// --------------------------------------------------------------------------------
function PclZipUtilTranslateWinPath($p_path, $p_remove_disk_letter = true) {
if (strtoupper(substr(PHP_OS, 0, 3)) === 'WIN') {
// ----- Look for potential disk letter
if (($p_remove_disk_letter) && (($v_position = strpos($p_path, ':')) != false)) {
$p_path = substr($p_path, $v_position + 1);
}
if ((strpos($p_path, '\') > 0) || (substr($p_path, 0, 1) == '\')) {
$p_path = strtr($p_path, '\', '/');
}
}
return $p_path;
}